Publication:
CFD analysis of temperature distribution in can-type combustor firing synthetic gas

Simple item page
dc.citedby3
dc.contributor.authorHasini H.en_US
dc.contributor.authorShuaib N.H.en_US
dc.contributor.authorWan Abdullah W.A.F.en_US
dc.contributor.authorid6507435998en_US
dc.contributor.authorid13907934500en_US
dc.contributor.authorid55898815500en_US
dc.date.accessioned2023-12-28T04:12:44Z
dc.date.available2023-12-28T04:12:44Z
dc.date.issued2013
dc.description.abstractThis paper presents CFD analysis of the effect of syngas combustion in a full scale gas turbine combustor with specific emphasis given to the flame and flue gas temperature distribution. A base case solution was first established using conventional natural gas combustion. Actual operating boundary conditions such as swirl, diffusion and fuel mass flow were imposed on the model. The simulation result is validated with the flame temperature of typical natural gas combustion. Result from flow and combustion calculation shows reasonable trend of the swirl mixing effect. The maximum flame temperature was found to be the highest for syngas with the highest H2/CO ratio. However, the flue gas temperature was found to be approximately identical for all cases. The prediction of temperature distribution in the combustor would enable further estimation of pollutant species such as CO2 and NOx in complex regions within the combustor. � (2013) Trans Tech Publications, Switzerland.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.4028/www.scientific.net/AMM.393.741
dc.identifier.epage746
dc.identifier.scopus2-s2.0-84886266142
dc.identifier.spage741
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84886266142&doi=10.4028%2fwww.scientific.net%2fAMM.393.741&partnerID=40&md5=a7a0f92d4663566ebc1b6c69b9955dd3
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29356
dc.identifier.volume393
dc.pagecount5
dc.sourceScopus
dc.sourcetitleApplied Mechanics and Materials
dc.subjectCan-type combustor
dc.subjectCFD
dc.subjectCombustion
dc.subjectNatural gas
dc.subjectSyngas
dc.subjectCarbon dioxide
dc.subjectCombustion
dc.subjectComputational fluid dynamics
dc.subjectFlue gases
dc.subjectMechanical engineering
dc.subjectNatural gas
dc.subjectSynthesis gas
dc.subjectTemperature distribution
dc.subjectFlame temperatures
dc.subjectFlue gas temperatures
dc.subjectGas turbine combustor
dc.subjectMaximum flame temperature
dc.subjectNatural gas combustion
dc.subjectPollutant species
dc.subjectSyn-gas
dc.subjectSyngas combustion
dc.subjectCombustors
dc.titleCFD analysis of temperature distribution in can-type combustor firing synthetic gasen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS