Publication:
Characterization of mechanical properties of kenaf fibre reinforced polymer composite using orientation with angle variation

Simple item page
dc.citedby2
dc.contributor.authorZainal S.N.en_US
dc.contributor.authorIsa M.R.en_US
dc.contributor.authorZaroog O.S.en_US
dc.contributor.authorJalal M.F.A.en_US
dc.contributor.authorSulaiman S.N.en_US
dc.contributor.authorIsmail I.N.en_US
dc.contributor.authorid57223339222en_US
dc.contributor.authorid57193957146en_US
dc.contributor.authorid57189246634en_US
dc.contributor.authorid37116431100en_US
dc.contributor.authorid57204634551en_US
dc.contributor.authorid55598767200en_US
dc.date.accessioned2023-05-29T09:07:42Z
dc.date.available2023-05-29T09:07:42Z
dc.date.issued2021
dc.description.abstractIn the past decades, the extensive studies had been accomplished on the natural fibre reinforced polymer composites (NFPC) and are still continuous until today. The composites made of natural fibre and polymer has proven the better effectiveness in high impact fatigue strength and toughness. The increases of fibre loading give higher results fundamental in strength due to its high interfacial bonding between the fibre. In the present work, experimental tests were carried out to study the mechanical properties; tensile, hardness and impact and morphological characterization: Scanning Electron Microscope (SEM) of the NFPC. The composites fabricated are between the Kenaf fibre and epoxy resin. The Kenaf fibre reinforced epoxy resin composites were fabricated using hand layup technique by layering the arranged fibre with polymer in the mould with different angle orientation (22.5� and 67.5�) as the main parameter observed and the fibre composition (2%, 4% and 6%). Before the fabrication started, the fibre had undergone the alkali treatment for the effective surface modification that can enhance the interfacial bonding between the fibre. � 2021 American Institute of Physics Inc.. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo20038
dc.identifier.doi10.1063/5.0044220
dc.identifier.scopus2-s2.0-85105670796
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85105670796&doi=10.1063%2f5.0044220&partnerID=40&md5=e711f389e477a90458babfac3d57ddfd
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/26201
dc.identifier.volume2339
dc.publisherAmerican Institute of Physics Inc.en_US
dc.sourceScopus
dc.sourcetitleAIP Conference Proceedings
dc.titleCharacterization of mechanical properties of kenaf fibre reinforced polymer composite using orientation with angle variationen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS