Publication:
Powder material parameters establishment through warm forming route

Simple item page
dc.citedby16
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorAriffin A.K.en_US
dc.contributor.authorNor S.S.M.en_US
dc.contributor.authorRahman H.Y.en_US
dc.contributor.authorid55328831100en_US
dc.contributor.authorid6701641666en_US
dc.contributor.authorid23492827600en_US
dc.contributor.authorid7101793656en_US
dc.date.accessioned2023-12-29T07:50:40Z
dc.date.available2023-12-29T07:50:40Z
dc.date.issued2011
dc.description.abstractThis paper presents the establishment of the properties of powder materials through experimentation at elevated temperature ranging from room temperature (30 �C) to 150 �C. Uniaxial die compaction experiments were conducted to establish the powder properties such as densification, Young's modulus, spring-back, plastic index, elastic index, and plastic hardening coefficient. Shearing experiments were conducted to establish the temperature dependent friction coefficient. Iron powder ASC 100.29, manufactured by H�gan�s AB Company was used during the experiment. The results showed that the deformation properties of powder materials especially iron powder are temperature dependent. The values of some properties are increased as the compaction temperature increased and vice versa. � 2010 Elsevier Ltd.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1016/j.matdes.2010.05.058
dc.identifier.epage271
dc.identifier.issue1
dc.identifier.scopus2-s2.0-77956177641
dc.identifier.spage264
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-77956177641&doi=10.1016%2fj.matdes.2010.05.058&partnerID=40&md5=e59c35b48eb635c9db40906f3ae9b614
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30638
dc.identifier.volume32
dc.pagecount7
dc.sourceScopus
dc.sourcetitleMaterials and Design
dc.subjectC. Powder metallurgy
dc.subjectF. Elastic behaviour
dc.subjectF. Plastic behaviour
dc.subjectAluminum powder metallurgy
dc.subjectCompaction
dc.subjectExperiments
dc.subjectFriction
dc.subjectHolmium
dc.subjectIron powder
dc.subjectIron powder metallurgy
dc.subjectMetallurgy
dc.subjectPlastics
dc.subjectSteel powder metallurgy
dc.subjectC. Powder metallurgy
dc.subjectCompaction temperature
dc.subjectDeformation properties
dc.subjectElastic behaviour
dc.subjectElevated temperature
dc.subjectF. Plastic behaviour
dc.subjectFriction coefficients
dc.subjectPlastic hardening coefficient
dc.subjectPowder material
dc.subjectPowder properties
dc.subjectRoom temperature
dc.subjectSpring-back
dc.subjectTemperature dependent
dc.subjectUniaxial die compaction
dc.subjectWarm forming
dc.subjectYoung's Modulus
dc.subjectMaterials properties
dc.titlePowder material parameters establishment through warm forming routeen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS