Publication:
Carbon powder as additive in near-net-shaping of mechanical components through warm forming route

Simple item page
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorKadir N.A.A.A.en_US
dc.contributor.authorid55328831100en_US
dc.contributor.authorid57225435954en_US
dc.date.accessioned2023-05-16T02:48:11Z
dc.date.available2023-05-16T02:48:11Z
dc.date.issued2014
dc.description.abstractThis paper presents the study of carbon powder as additive in near-net-shaping of mechanical components through warm forming route. Three design parameters, i.e., carbon content (wt %), forming temperature, and sintering schedule were investigated. Iron powder ASC 100.29 was mechanically mixed with different wt% of carbon and copper powder for 30 minutes to prepare the feedstock. Green compacts were then formed through uni-axial die compaction process at 30°C and 180C. The defect-free green compacts were then sintered at 1000C in an argon gas fired furnace at a heating/cooling rate of 5C/minute for 30, 60, and 90 minutes, respectively. The green samples as well the sintered products were characterized through relative density measurement, radial shrinkage, and microstructure evaluation. The results revealed that excessive carbon content contributed adverse effect to the final quality of the products. Copyright © 2014 Trans Tech Publications Ltd, Switzerland.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.4028/www.scientific.net/KEM.594-595.948
dc.identifier.epage952
dc.identifier.scopus2-s2.0-84891845965
dc.identifier.spage948
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84891845965&doi=10.4028%2fwww.scientific.net%2fKEM.594-595.948&partnerID=40&md5=055c7a9b7028e497991cab674141ae80
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22183
dc.identifier.volume594-595
dc.publisherTrans Tech Publications Ltden_US
dc.sourceScopus
dc.sourcetitleKey Engineering Materials
dc.titleCarbon powder as additive in near-net-shaping of mechanical components through warm forming routeen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS