Publication:
The effect of sintering ramp rate on the sinterability of forsterite ceramics

Simple item page
dc.citedby1
dc.contributor.authorThe Y.C.en_US
dc.contributor.authorTan C.Y.en_US
dc.contributor.authorRamesh S.en_US
dc.contributor.authorChristopher Chin K.M.en_US
dc.contributor.authorTan Y.M.en_US
dc.contributor.authorYap B.K.en_US
dc.contributor.authorAimiriyan M.en_US
dc.contributor.authorid56451004900en_US
dc.contributor.authorid16029485400en_US
dc.contributor.authorid41061958200en_US
dc.contributor.authorid55489822300en_US
dc.contributor.authorid55877494100en_US
dc.contributor.authorid26649255900en_US
dc.contributor.authorid56451216600en_US
dc.date.accessioned2023-05-16T02:22:47Z
dc.date.available2023-05-16T02:22:47Z
dc.date.issued2014
dc.description.abstractIn the present work, pure forsterite (Mg2SiO4) powder was successfully synthesised via ball milling and subsequent heat treatment as an evident from X-ray diffraction analysis. The synthesised powder were formed by powder agglomerates that were made up of loosely packed fine particles. Then, the forsterite green bodies were sintered at 1200 and 1400°C with two different ramp rates (2 and 10°C per minute) via conventional pressureless sintering. No decomposition of forsterite phase was observed at both ramp rates. This study revealed that lower ramp rate (2°C per minute) possessed minor improvement on the mechanical properties only at lower sintering temperature (1200°C), whereas 10°C per minute ramp rate gave a significant enhancement on the mechanical properties of forsterite at 1400°C. A high fracture toughness of ?49 MPam1/2 and Vickers hardness of ?1 GPa were obtained for forsterite samples sintered at 1400°C with a ramp rate of 10°C per minute. © W. S. Maney &Son Ltd 2014.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1179/1432891714Z.000000000932
dc.identifier.epage61-S6-64
dc.identifier.scopus2-s2.0-84918832543
dc.identifier.spageS6
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84918832543&doi=10.1179%2f1432891714Z.000000000932&partnerID=40&md5=e6659839fbc5b4ea0327de5ae300d555
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/21817
dc.identifier.volume18
dc.publisherManey Publishingen_US
dc.sourceScopus
dc.sourcetitleMaterials Research Innovations
dc.titleThe effect of sintering ramp rate on the sinterability of forsterite ceramicsen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS