Publication:
Heat transfer and fouling deposition investigation on the titanium coated heat exchanger surface

Simple item page
dc.citedby14
dc.contributor.authorOon C.S.en_US
dc.contributor.authorKazi S.N.en_US
dc.contributor.authorHakimin M.A.en_US
dc.contributor.authorAbdelrazek A.H.en_US
dc.contributor.authorMallah A.R.en_US
dc.contributor.authorLow F.W.en_US
dc.contributor.authorTiong S.K.en_US
dc.contributor.authorBadruddin I.A.en_US
dc.contributor.authorKamanger S.en_US
dc.contributor.authorid55332679600en_US
dc.contributor.authorid7003406290en_US
dc.contributor.authorid57218122083en_US
dc.contributor.authorid57195593716en_US
dc.contributor.authorid57203285563en_US
dc.contributor.authorid56513524700en_US
dc.contributor.authorid15128307800en_US
dc.contributor.authorid12544753000en_US
dc.contributor.authorid57218127676en_US
dc.date.accessioned2023-05-29T08:08:39Z
dc.date.available2023-05-29T08:08:39Z
dc.date.issued2020
dc.descriptionCalcium carbonate; Corrosion resistance; Corrosion resistant coatings; Fouling; Heat resistance; Heat transfer performance; Metal coatings; Physical vapor deposition; Textures; Coated heat exchanger; Coating material; Enhanced heat transfer; Fouling depositions; Fouling mitigation; Heat exchanger performance; Heat transfer resistance; Surface textures; Heat exchangers; calcium carbonate; titanium; Article; biofouling; coating (procedure); conductance; corrosion; flow rate; heat transfer; microscopy; physical vapor depositionen_US
dc.description.abstractFouling is the undesired deposition on heat exchanger surfaces which enhance heat transfer resistances and retard heat exchanger performance. This paper investigates fouling mitigation of calcium carbonate by the application of coatings on SS316L heat exchanger. Titanium (Ti) was selected as coating material due to its high resistance to corrosion and good surface adhesion. Physical vapor deposition method was adopted to coat Ti on the SS316L surface. Heat transfer investigation at different flow rates were conducted to observe the effect of coating and then fouling experiments were carried out to investigate the deposition of Calcium Carbonate to the coated and uncoated surfaces. The test section was taken under microscopic investigation to study the surface texture before and after the fouling effect. It was observed that the Ti coated SS316L surface of heat exchanger surface experienced less corrosion, enhanced heat transfer and reduced fouling deposition. � 2020 Elsevier B.V.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1016/j.powtec.2020.07.010
dc.identifier.epage680
dc.identifier.scopus2-s2.0-85087991544
dc.identifier.spage671
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85087991544&doi=10.1016%2fj.powtec.2020.07.010&partnerID=40&md5=acde4395314be27f58deb8ce44cc41b4
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/25372
dc.identifier.volume373
dc.publisherElsevier B.V.en_US
dc.sourceScopus
dc.sourcetitlePowder Technology
dc.titleHeat transfer and fouling deposition investigation on the titanium coated heat exchanger surfaceen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS