Publication:
Distribution of electric field in medium voltage cable joint geometry

Simple item page
dc.citedby13
dc.contributor.authorIllias H.A.en_US
dc.contributor.authorLee Z.H.en_US
dc.contributor.authorBakar A.H.A.en_US
dc.contributor.authorMokhlis H.en_US
dc.contributor.authorMohd Ariffin A.en_US
dc.contributor.authorid26633053900en_US
dc.contributor.authorid55604857700en_US
dc.contributor.authorid24447916700en_US
dc.contributor.authorid8136874200en_US
dc.contributor.authorid16400722400en_US
dc.date.accessioned2023-12-29T07:46:15Z
dc.date.available2023-12-29T07:46:15Z
dc.date.issued2012
dc.description.abstractCable joint is used to connect different sections of cable because a cable section is limited to a certain length. The design of a cable joint mainly depends on the cable type, the applied voltage and the cores. These factors contribute to the way of how electric field stress is distributed at the cable joint. If there are defects exist within the cable joint insulation material, the electric field at that region is altered. The alteration may cause electrical discharges to occur within the defects if the electric field magnitude is larger than the breakdown strength at the defect sites. Therefore, this paper investigates the electric field distribution in a medium voltage cable joint in the presence of defects. The investigation was done through modelling a medium voltage (MV) cable joint using finite element analysis (FEA) software. Several parameters such as the defect size and location, insulation material dielectric constant and insulation thickness have been studied of their effects on the electric field distribution at the cable joint. The results obtained may be able to help in the designing of cable joint structures which can reduce the electric field stress. � 2012 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6416337
dc.identifier.doi10.1109/CMD.2012.6416337
dc.identifier.epage1054
dc.identifier.scopus2-s2.0-84874232478
dc.identifier.spage1051
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84874232478&doi=10.1109%2fCMD.2012.6416337&partnerID=40&md5=fe310da71bab0eb0f587ac721cbf5521
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30280
dc.pagecount3
dc.relation.ispartofAll Open Access; Green Open Access
dc.sourceScopus
dc.sourcetitleProceedings of 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012
dc.subjectelectric field
dc.subjectfinite element analysis
dc.subjectmedium voltage cable joint
dc.subjectCable cores
dc.subjectCondition monitoring
dc.subjectDefects
dc.subjectElectric discharges
dc.subjectElectric fields
dc.subjectFinite element method
dc.subjectInsulating materials
dc.subjectApplied voltages
dc.subjectBreakdown strengths
dc.subjectCable joint
dc.subjectCable types
dc.subjectDefect sites
dc.subjectDefect size
dc.subjectDistribution of electric fields
dc.subjectElectric field distributions
dc.subjectElectric field magnitude
dc.subjectElectric field stress
dc.subjectElectrical discharges
dc.subjectIf there are
dc.subjectInsulation materials
dc.subjectInsulation thickness
dc.subjectMedium voltage cables
dc.subjectCable jointing
dc.titleDistribution of electric field in medium voltage cable joint geometryen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS