Publication:
The effect of titanium oxide and hydroxyapatite on the mechanical properties of wollastonite

Simple item page
dc.citedby1
dc.contributor.authorRagurajan D.en_US
dc.contributor.authorSatgunam M.en_US
dc.contributor.authorGolieskardi M.en_US
dc.contributor.authorSankar U.en_US
dc.contributor.authorNg A.M.H.en_US
dc.contributor.authorid56520125100en_US
dc.contributor.authorid48561725600en_US
dc.contributor.authorid55866907000en_US
dc.contributor.authorid57188558332en_US
dc.contributor.authorid8330324300en_US
dc.date.accessioned2023-05-29T07:29:21Z
dc.date.available2023-05-29T07:29:21Z
dc.date.issued2019
dc.description.abstractThe effect of incorporation of titanium oxide (TiO2) and hydroxyapatite (HA) on the mechanical properties of wollastonite (CaSiO3) was investigated in this study. TiO2/CaSiO3/HA composites were prepared and characterized by means of physical and mechanical properties. Morphology analysis revealed that the wollastonite composite possesses a rough surface. Moreover, the addition of TiO2 and HA to wollastonite was evaluated by means of bulk density and Vickers Hardness. The wollastonite composites containing TiO2 (10�30 wt%) and HA (20�40 wt%) were sintered between 1230�C and 1270�C, with a ramp rate of 10�C/min and a holding time of 2 h. The results indicated that the additives played a significant part in enhancing the physical and mechanical properties of the composite wollastonite in comparison to the pure wollastonite, particularly in composites containing higher percentage of TiO2 (25�30 wt%) and lower HA (20�25 wt%). Furthermore, the results obtained from the XRD analysis revealed that the newly formed apatite particles on the surface of the wollastonite composite were comprise of superfine crystalline and/or defective structure grains. � 2019, � 2019 The Author(s). This open access article is distributed under a Creative Commons Attribution (CC-BY) 4.0 license.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo1662163
dc.identifier.doi10.1080/23311916.2019.1662163
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85073072310
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85073072310&doi=10.1080%2f23311916.2019.1662163&partnerID=40&md5=38d05c56d5326110c26013d4c219c40f
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24953
dc.identifier.volume6
dc.publisherCogent OAen_US
dc.relation.ispartofAll Open Access, Gold
dc.sourceScopus
dc.sourcetitleCogent Engineering
dc.titleThe effect of titanium oxide and hydroxyapatite on the mechanical properties of wollastoniteen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS