Publication:
Characterization of Fe 2 O 3 /Mn 2 O 3 oxygen carrier for chemical looping combustion prepared by dry impregnation method

Simple item page
dc.citedby3
dc.contributor.authorAfandi N.M.en_US
dc.contributor.authorManap A.N.A.en_US
dc.contributor.authorMansor F.H.en_US
dc.contributor.authorGhani M.F.A.en_US
dc.contributor.authorKadir N.F.en_US
dc.contributor.authorLiu W.en_US
dc.contributor.authorid57189231851en_US
dc.contributor.authorid57200642155en_US
dc.contributor.authorid57205234842en_US
dc.contributor.authorid57205234343en_US
dc.contributor.authorid24481091600en_US
dc.contributor.authorid57209289745en_US
dc.date.accessioned2023-05-29T06:54:44Z
dc.date.available2023-05-29T06:54:44Z
dc.date.issued2018
dc.description.abstractRecently, bauxite waste was found as newly sourced of Fe-based oxygen carrier in chemical looping combustion (CLC) since it contains high Fe and capable to be used as oxygen carrier at low cost. This study focuses on synthesizing and characterizing the bauxite waste that found in Malaysia with Mn 2 O 3 using dry impregnation method and study the feasibility of this bauxite waste as oxygen carrier. Results show the combination of bauxite waste - Mn 2 O 3 at 900�C produces crystallite size 21 nm with the presence of Fe-Mn, stable Al 2 O 3 and Ti elements that can improve the reactivity of Fe-Mn oxygen carrier. Moreover, Al 2 O 3 that contains naturally in bauxite waste can acts as supported material for Fe-Mn oxygen carrier in order to increase performance in CLC process. Therefore, this powder was successfully synthesized using dry impregnation method at calcination temperature 900�C and fit to be tested in a fluidized bed reactor to simulate the CLC process since it has smaller and stable particle size. � 2018 Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.14419/ijet.v7i4.35.23087
dc.identifier.epage677
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85059236635
dc.identifier.spage674
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85059236635&doi=10.14419%2fijet.v7i4.35.23087&partnerID=40&md5=7d787d579555ff857237a870b0910fce
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24044
dc.identifier.volume7
dc.publisherScience Publishing Corporation Incen_US
dc.relation.ispartofAll Open Access, Bronze, Green
dc.sourceScopus
dc.sourcetitleInternational Journal of Engineering and Technology(UAE)
dc.titleCharacterization of Fe 2 O 3 /Mn 2 O 3 oxygen carrier for chemical looping combustion prepared by dry impregnation methoden_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS