Publication: Effect of fly ash on mechanical properties and microstructural behaviour of injected moulded recycled polypropylene composites
Date
2024
Authors
Nasir N.H.M.
Usman F.
Woen E.L.
Ansari M.N.M.
Sofyan M.
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier Ltd
Abstract
The global challenges of plastic waste and fly ash accumulation demand innovative recycling solutions. In Malaysia, the consumption of 11.2 million tonnes of coal annually generates approximately 2 million tonnes of fly ash, while the recycling of Polypropylene (PP) is hindered by thermo-oxidative and shear-induced degradation during mechanical recycling, resulting in reduced mechanical properties. This study addresses these issues by fabricating recycled PP composites incorporating varying fly ash contents, using a single cycle of mechanical recycling with extrusion and injection moulding methods. The composites were comprehensively tested for tensile, flexural, and compressive strengths, as well as microstructural behaviour. The results reveal a complex relationship between fly ash content and mechanical performance: while tensile strength decreases with increasing fly ash, flexural strength and strain peak at 5 % and 9 % fly ash, respectively. Compressive strength also shows a slight increase up to 7 % fly ash, indicating an optimal range for enhancing mechanical performance. Furthermore, mathematical models were proposed to predict the mechanical properties of rPP ? fly ash composites, providing a valuable tool for future material design. These findings demonstrate that optimization of fly ash content can mitigate the effects of polymer degradation, offering a sustainable solution to improving the mechanical performance of this composite. ? 2024 Elsevier Ltd
Description
Keywords
Coal ash , Compressive strength , Fly ash , Polypropylenes , Fly ash content , Global challenges , Mechanical , Mechanical performance , Mechanical recycling , Micro-structural , Plastics waste , Polypropylene composite , Property , Recycled polypropylene , Plastic recycling