Publication:
Design of a Low Power and High-Efficiency Charge Pump Circuit for RFID Transponder EEPROM [Zasnova vezja crpalke naboja z majhno mocjo in visoko ucinkovitostjo za RFID transponder EEPROM]

Simple item page
dc.citedby2
dc.contributor.authorRahman L.F.en_US
dc.contributor.authorAlam L.en_US
dc.contributor.authorMarufuzzaman M.en_US
dc.contributor.authorid36984229900en_US
dc.contributor.authorid37053462100en_US
dc.contributor.authorid57205234835en_US
dc.date.accessioned2023-05-29T08:06:44Z
dc.date.available2023-05-29T08:06:44Z
dc.date.issued2020
dc.description.abstractThe charge pump (CP) circuit is an essential part of a radio frequency identification electrically-erasable-programmableread-only memory (RFID-EEPROM). A CP circuit generates a boosted output voltage that is greater than the power supply voltage. However, the performance of the diode configured CP circuits is strongly affected by the extra power dissipation and the parasitic capacitance. The parasitic capacitors of the CP circuit are also responsible for increased power consumption. In this research, an improved CP circuit is designed for achieving higher output voltage gain by reducing the parasitic capacitances. Moreover, the proposed course consumes less power, which makes it more suitable for low power applications like RFID transponder. The proposed CP circuit is using the internal boosted voltage for backward control where active controls are applied to the charge transfer switch (CTS) to eradicate the reverse charge sharing trends. Simulated results showed that by using 1 pF pumping capacitor to drive the capacitive output load, the proposed circuit generates 9.56 V under 1.2 V power supply. In comparison with other research, works, this CP circuit consumes less power (only 15.26 ?W), which is lower than previous research works. Moreover, the proposed CTS CP circuit can operate with the efficiency of 79.3%, which is found higher compared to other research works. Thus, the proposed design will be an essential module for low power applications like RFID transponder EEPROM. Copyright � 2020 by the Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.33180/InfMIDEM2020.403
dc.identifier.epage261
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85102346149
dc.identifier.spage255
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85102346149&doi=10.33180%2fInfMIDEM2020.403&partnerID=40&md5=dd9816841bcbc39fe667a7a7f0c19eb6
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/25090
dc.identifier.volume50
dc.publisherSociety for Microelectronics, Electric Components and Materialsen_US
dc.relation.ispartofAll Open Access, Gold
dc.sourceScopus
dc.sourcetitleInformacije MIDEM
dc.titleDesign of a Low Power and High-Efficiency Charge Pump Circuit for RFID Transponder EEPROM [Zasnova vezja crpalke naboja z majhno mocjo in visoko ucinkovitostjo za RFID transponder EEPROM]en_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS