Publication:
Electric field distribution in 132 kV XLPE cable termination model from finite element method

Simple item page
dc.citedby14
dc.contributor.authorIllias H.A.en_US
dc.contributor.authorNg Q.L.en_US
dc.contributor.authorBakar A.H.A.en_US
dc.contributor.authorMokhlis H.en_US
dc.contributor.authorAriffin A.M.en_US
dc.contributor.authorid26633053900en_US
dc.contributor.authorid55605108200en_US
dc.contributor.authorid24447916700en_US
dc.contributor.authorid8136874200en_US
dc.contributor.authorid16400722400en_US
dc.date.accessioned2023-12-29T07:46:25Z
dc.date.available2023-12-29T07:46:25Z
dc.date.issued2012
dc.description.abstractHigh voltage cable terminations are widely used in power system networks. A proper design of cable termination is essential in reducing the electric field distribution around the end of high voltage cable. However, if there are defects exist at cable termination structure, the electric field can be enhanced significantly and can be the source of electrical discharges. Therefore, it is important to understand the effect of defects on the electric field distribution at cable terminations. In this work, a 132 kV XLPE outdoor cable termination has been modelled using finite element analysis (FEA) method. The model has been used to simulate the electric field distribution in the cable termination in the presence of defects. Defects that have been considered are void defect in porcelain, stress cone and fluid, sharp pin on the porcelain surface and delamination defect between the insulator and the stress cone. The effect of different void location, material dielectric constant and porcelain radius on the electric field magnitude at cable termination have also been investigated. From the results obtained in this work, a better understanding of the electric field distribution at the cable termination with defects can be attained. � 2012 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6416254
dc.identifier.doi10.1109/CMD.2012.6416254
dc.identifier.epage83
dc.identifier.scopus2-s2.0-84874243390
dc.identifier.spage80
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84874243390&doi=10.1109%2fCMD.2012.6416254&partnerID=40&md5=fa34240cefa5487db113660df513ef1f
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30297
dc.pagecount3
dc.relation.ispartofAll Open Access; Green Open Access
dc.sourceScopus
dc.sourcetitleProceedings of 2012 IEEE International Conference on Condition Monitoring and Diagnosis, CMD 2012
dc.subjectcable termination
dc.subjectelectric field
dc.subjectfinite element analysis
dc.subjectCondition monitoring
dc.subjectDielectric materials
dc.subjectElectric connectors
dc.subjectElectric discharges
dc.subjectElectric fields
dc.subjectFinite element method
dc.subjectLeakage (fluid)
dc.subjectPorcelain
dc.subjectSurface defects
dc.subjectDelamination defects
dc.subjectElectric field distributions
dc.subjectElectric field magnitude
dc.subjectElectrical discharges
dc.subjectHigh voltage cable
dc.subjectIf there are
dc.subjectPower system networks
dc.subjectProper design
dc.subjectVoid defects
dc.subjectCables
dc.titleElectric field distribution in 132 kV XLPE cable termination model from finite element methoden_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS