Publication: Impacts of Earthing Arrangement on Lightning Protection Efficiency of Grid Connected PV System
Date
2021
Authors
Khurshid Z.M.
Gomes C.
Journal Title
Journal ISSN
Volume Title
Publisher
Institute of Electrical and Electronics Engineers Inc.
Abstract
This paper investigates the potential and current distribution of a grid-connected (PV) system with surge protective devices connected according to the European Commission for Electrotechnical Standardization (CENELEC) under various values of grounding resistance for isolated and integrated AC and DC earthing systems. A 400 kW PV system is implemented using PSCAD/EMTDC software, where the system is connected to a 33 kV grid through a boost transformer. The simulation results were obtained for negative subsequent lightning stroke (50% value), developed by Heidler function. The current was injected separately into both the DC and the AC sides of the PV inverter. The values of resistance of the earthing systems have been varied over a set of combinations. The results show that when the AC and DC sides are separately earthed for non-zero values of resistance, the line potentials reach very high values posing a severe risk of a system to earth arcing. The situation is worse when the lightning strikes the DC side and when the DC side earth resistance has high values. The situation improves significantly when the earthing systems are integrated. It is advisable to achieve an earth resistance below 5 ? for the integrated earthing system. � 2021 IEEE.
Description
Electric grounding; Electric resistance; Lightning protection; Surge protection; AC-side; CENELEC standards; DC side; Earth resistance; Earthing system; Grid connected PV system; Grounding resistance; PV system; Surge protective device; Surge protective devices; Transient analysis