Publication:
Affect of binder on mechanical and physical characterization of titanium dioxide based varistor

Simple item page
dc.citedby0
dc.contributor.authorGholizadehsangesaraki S.en_US
dc.contributor.authorBegum S.en_US
dc.contributor.authorNainar M.A.M.en_US
dc.contributor.authorKothandapani Z.en_US
dc.contributor.authorid55787175800en_US
dc.contributor.authorid7101852571en_US
dc.contributor.authorid55489853600en_US
dc.contributor.authorid55786763900en_US
dc.date.accessioned2023-12-28T06:30:27Z
dc.date.available2023-12-28T06:30:27Z
dc.date.issued2012
dc.description.abstractDevelopment of high performance titanium dioxide (TiO2) based varistor materials demands binders to improve its physical properties which will ultimately enhance its electrical performances. The material used for ceramic based varistor should exhibit good mechanical properties. As for desired mechanical properties, porosity should be minimal, high fired density, high sintered strength and small average grain size are desired. In this paper effect of PVA (binder) on TiO2 was investigated and its influence on physical, mechanical and microstructure was observed. The binder was added during ball milling and then followed by the shaping and sintering process. The samples were characterized by evaluating fired density, hardness, compressive strength and microstructure. Our studies revealed that varistor disc with higher density, hardness and strength can be produced with the use of binder. � 2012 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6521808
dc.identifier.doi10.1109/IEMT.2012.6521808
dc.identifier.scopus2-s2.0-84879854906
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84879854906&doi=10.1109%2fIEMT.2012.6521808&partnerID=40&md5=8525403749673b8346c2a4a6427cc332
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29541
dc.sourceScopus
dc.sourcetitleProceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium
dc.subjectBall milling
dc.subjectCompressive strength
dc.subjectDensity (specific gravity)
dc.subjectElectric properties
dc.subjectHardness
dc.subjectIndustrial electronics
dc.subjectManufacture
dc.subjectMicrostructure
dc.subjectOxides
dc.subjectSintering
dc.subjectTitanium dioxide
dc.subjectVaristors
dc.subjectAverage grain size
dc.subjectElectrical performance
dc.subjectMechanical and physical characterization
dc.subjectSintered strength
dc.subjectSintering process
dc.subjectTiO
dc.subjectVaristor materials
dc.subjectBinders
dc.titleAffect of binder on mechanical and physical characterization of titanium dioxide based varistoren_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS