Publication:
The influence of different types of nanofluid on thermal and fluid flow performance of liquid cold plate

Simple item page
dc.citedby3
dc.contributor.authorOm N.I.en_US
dc.contributor.authorZulkifli R.en_US
dc.contributor.authorGunnasegaran P.en_US
dc.contributor.authorid42162023000en_US
dc.contributor.authorid6507509139en_US
dc.contributor.authorid35778031300en_US
dc.date.accessioned2023-05-29T06:55:16Z
dc.date.available2023-05-29T06:55:16Z
dc.date.issued2018
dc.description.abstractThe influence of utilizing different nanofluids types on the liquid cold plate (LCP) is numerically investigated. The thermal and fluid flow performance of LCP is examined by using pure ethylene glycol (EG), Al 2 O 3 -EG and CuO-EG. The volume fraction of the nanoparticle for both nanofluid is 2%. The finite volume method (FVM) has been used to solved 3-D steady state, laminar flow and heat transfer governing equations. The presented results indicate that Al 2 O 3 -EG able to provide the lowest surface temperature of the heater block followed by CuO-EG and EG, respectively. It is also found that the pressure drop and friction factor are higher for Al 2 O 3 -EG and CuO-EG compared to the pure EG. � 2018 Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.14419/ijet.v7i4.35.22346
dc.identifier.epage152
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85059229109
dc.identifier.spage148
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85059229109&doi=10.14419%2fijet.v7i4.35.22346&partnerID=40&md5=ac1e486af4d81ba6b16755befa5f2b7d
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24086
dc.identifier.volume7
dc.publisherScience Publishing Corporation Incen_US
dc.relation.ispartofAll Open Access, Bronze
dc.sourceScopus
dc.sourcetitleInternational Journal of Engineering and Technology(UAE)
dc.titleThe influence of different types of nanofluid on thermal and fluid flow performance of liquid cold plateen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS