Publication:
Simulation of partial discharge within a void under square waveform applied voltage

Simple item page
dc.citedby3
dc.contributor.authorIllias H.A.en_US
dc.contributor.authorBakar A.H.A.en_US
dc.contributor.authorMokhlis H.en_US
dc.contributor.authorTunio M.A.en_US
dc.contributor.authorChen G.en_US
dc.contributor.authorLewin P.L.en_US
dc.contributor.authorAriffin A.M.en_US
dc.contributor.authorid26633053900en_US
dc.contributor.authorid24447916700en_US
dc.contributor.authorid8136874200en_US
dc.contributor.authorid24318982800en_US
dc.contributor.authorid35770336200en_US
dc.contributor.authorid7102386669en_US
dc.contributor.authorid16400722400en_US
dc.date.accessioned2023-12-29T07:46:14Z
dc.date.available2023-12-29T07:46:14Z
dc.date.issued2012
dc.description.abstractPartial discharge (PD) activity within a void in a dielectric material is influenced by many factors. One of the factors is the applied voltage waveform on the material. In this paper, a two-dimensional (2D) model of a cylindrical void in polyethylene layers has been developed using finite element analysis (FEA) software. The model was used to simulate PD activity in the void under square waveform applied voltage. The obtained simulation results were compared with the measurement results from literature. It was found that both results are within reasonable agreement but with only slight disagreement. From comparison, critical parameters from the model affecting PD activity under square waveform applied voltage were identified; they include the inception and extinction voltages and electron generation rate. This finding may increase an understanding of PD behaviour within a void in a dielectric material under square waveform applied voltage. � 2012 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6378726
dc.identifier.doi10.1109/CEIDP.2012.6378726
dc.identifier.epage79
dc.identifier.scopus2-s2.0-84872081056
dc.identifier.spage76
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84872081056&doi=10.1109%2fCEIDP.2012.6378726&partnerID=40&md5=5ffe1fb95a7d302fc24f8d7e097b2ab0
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30278
dc.pagecount3
dc.relation.ispartofAll Open Access; Green Open Access
dc.sourceScopus
dc.sourcetitleAnnual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP
dc.subjectFinite element method
dc.subjectPartial discharges
dc.subjectApplied voltages
dc.subjectCritical parameter
dc.subjectCylindrical voids
dc.subjectElectron generation
dc.subjectMeasurement results
dc.subjectSquare waveform
dc.subjectTwo-dimensional (2D) models
dc.subjectDielectric materials
dc.titleSimulation of partial discharge within a void under square waveform applied voltageen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS