Publication:
Tuning of PID controller for a synchronous machine connected to a non-linear load

Simple item page
dc.citedby1
dc.contributor.authorKasilingam G.en_US
dc.contributor.authorPasupuleti J.en_US
dc.contributor.authorid55812078500en_US
dc.contributor.authorid11340187300en_US
dc.date.accessioned2023-05-16T02:46:50Z
dc.date.available2023-05-16T02:46:50Z
dc.date.issued2014
dc.description.abstractThis paper proposes a method of determining the optimal proportional integral derivative (PID) controller parameters using the particle swarm optimization (PSO) technique. The stability of the power system is an important factor in the operation of any electric system. A PID controller with a power system stabilizer (PSS) has been developed to maintain the stability and enhance the performance of the power system. Optimization of PID parameters is an important problem in control engineering. A PSO algorithm has been proposed to tune the parameters of the PID controller. The effectiveness of the PID-based PSS has been tested on a single-machine infinite-bus (SMIB) system having a three-phase thyristor-based non-linear load with different kinds of faults. Analysis shows that the dynamic performance with the proposed method is better compared with the conventional trial-and-error method. The speed deviation, rotor angle deviation and load angle were compared in a Simulink-based MATLAB environment. The simulations show that the proposed method damps optimally and suppresses errors to a minimum. © 2006-2014 Asian Research Publishing Network (ARPN).en_US
dc.description.natureFinalen_US
dc.identifier.epage1668
dc.identifier.issue9
dc.identifier.scopus2-s2.0-84907259227
dc.identifier.spage1659
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84907259227&partnerID=40&md5=ad0a993b865b991e3d21e16a72392da0
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22035
dc.identifier.volume9
dc.publisherAsian Research Publishing Networken_US
dc.sourceScopus
dc.sourcetitleARPN Journal of Engineering and Applied Sciences
dc.titleTuning of PID controller for a synchronous machine connected to a non-linear loaden_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS