Publication:
Evaluation of reference signal estimation techniques for the control of shunt active power filter

Simple item page
dc.citedby5
dc.contributor.authorAtan N.B.en_US
dc.contributor.authorYunus B.B.en_US
dc.contributor.authorid26422792900en_US
dc.contributor.authorid24448917500en_US
dc.date.accessioned2023-12-29T07:52:38Z
dc.date.available2023-12-29T07:52:38Z
dc.date.issued2009
dc.description.abstractThis paper presents the implementations of a new control algorithm for a three-phase shunt active power filter to regulate load terminal voltage, eliminate harmonics, and improve the power factor in systems with an uncontrolled rectifier and an AC controller as the non-linear loads. Different methods are used to control the active power filters. The reference current to be detected from the load current and processed by the active power filter controller is obtained from two different control algorithms, namely the Instantaneous Reactive Power Theory (PQ Theory) and Synchronous Reference Frame Theory (SRF Theory). The system is modeled and simulated using MATLAB/Simulink simulation package with a shunt active power filter to compensate for the harmonics current injected by the loads. It is then interfaced and verified using a Real-Time Digital Signal Processor DS1104 accompanied by an application (dSPACE) that is employed to view the simulation results and control the parameters of the simulation. �2009 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo5398631
dc.identifier.doi10.1109/ICEENVIRON.2009.5398631
dc.identifier.epage293
dc.identifier.scopus2-s2.0-77949581762
dc.identifier.spage290
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-77949581762&doi=10.1109%2fICEENVIRON.2009.5398631&partnerID=40&md5=d786dccc0dcd6c089e2b8e9632f5513d
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30756
dc.pagecount3
dc.sourceScopus
dc.sourcetitleICEE 2009 - Proceeding 2009 3rd International Conference on Energy and Environment: Advancement Towards Global Sustainability
dc.subjectSpectum waveform
dc.subjectTotal harmonic distortion
dc.subjectActive filters
dc.subjectAlgorithms
dc.subjectControllers
dc.subjectDigital signal processors
dc.subjectElectric power factor correction
dc.subjectHarmonic analysis
dc.subjectHarmonic distortion
dc.subjectPower converters
dc.subjectSignal processing
dc.subjectSustainable development
dc.subjectWave filters
dc.subjectActive power Filter
dc.subjectControl algorithms
dc.subjectD-space
dc.subjectHarmonics current
dc.subjectInstantaneous reactive power theory
dc.subjectLoad currents
dc.subjectLoad terminal voltage
dc.subjectMatlab/Simulink simulation
dc.subjectNonlinear load
dc.subjectP-q theory
dc.subjectPower factors
dc.subjectReference currents
dc.subjectReference signals
dc.subjectShunt active power filters
dc.subjectSimulation result
dc.subjectSynchronous reference frame
dc.subjectTotal harmonic distortions
dc.subjectUncontrolled rectifiers
dc.subjectWave forms
dc.subjectElectric rectifiers
dc.titleEvaluation of reference signal estimation techniques for the control of shunt active power filteren_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS