Publication:
Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material

Simple item page
dc.citedby13
dc.contributor.authorLiu J.en_US
dc.contributor.authorNaeem M.A.en_US
dc.contributor.authorAl Kouzbary M.en_US
dc.contributor.authorAl Kouzbary H.en_US
dc.contributor.authorShasmin H.N.en_US
dc.contributor.authorArifin N.en_US
dc.contributor.authorAbd Razak N.A.en_US
dc.contributor.authorAbu Osman N.A.en_US
dc.contributor.authorid57223432161en_US
dc.contributor.authorid57198040589en_US
dc.contributor.authorid57202956887en_US
dc.contributor.authorid57216612501en_US
dc.contributor.authorid35778974400en_US
dc.contributor.authorid18133590700en_US
dc.contributor.authorid42261165400en_US
dc.contributor.authorid8511221500en_US
dc.date.accessioned2024-10-14T03:21:38Z
dc.date.available2024-10-14T03:21:38Z
dc.date.issued2023
dc.description.abstract3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the mass of the standard specimen, on the compressive strength is investigated with a carbon fiber-reinforced nylon material. With the same infill pattern, specimens with more mass have a higher compressive strength. With the same mass, specimens with triangular fill have a higher compressive strength than those with rectangular and gyroid fills. Compared with specimens with a solid fill, specimens with a triangular fill can also provide more compressive strength in a unit mass. According to the results of standard specimens, following the requirement of strength and lightweight, 41% triangular fill is selected to manufacture the supporting part of a powered ankle-foot prosthesis. Under a compressive load of 1225 N, the strain of the assembly of the standard adaptor and the 3D-printed part is 1.32 � 0.04%, which can meet the requirement of the design. This study can provide evidence for other 3D-printed applications with the requirement of compressive strength. � 2023 by the authors.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo255
dc.identifier.doi10.3390/polym15020255
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85146658121
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85146658121&doi=10.3390%2fpolym15020255&partnerID=40&md5=72e077bc2e6eaee88a65a53ace0dead3
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/34675
dc.identifier.volume15
dc.publisherMDPIen_US
dc.relation.ispartofAll Open Access
dc.relation.ispartofGold Open Access
dc.relation.ispartofGreen Open Access
dc.sourceScopus
dc.sourcetitlePolymers
dc.subject3D print
dc.subjectcarbon fiber-reinforced nylon
dc.subjectcompressive strength
dc.subjectFDM
dc.subjectinfill density
dc.subjectinfill pattern
dc.subjectpowered ankle-foot prosthesis
dc.subject3D printers
dc.subjectCompression testing
dc.subjectInfill drilling
dc.subjectPolyamides
dc.subjectProsthetics
dc.subjectRayon
dc.subjectReinforcement
dc.subject3-D printing
dc.subject3d prints
dc.subject3D-printing
dc.subjectCarbon fiber reinforced
dc.subjectCarbon fiber-reinforced nylon
dc.subjectInfill density
dc.subjectInfill pattern
dc.subjectPowered ankle-foot prosthesis
dc.subjectReinforced nylons
dc.subjectStandard specimens
dc.subjectCompressive strength
dc.titleEffect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Materialen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS