Publication:
Consequence on Optical Properties of ZnS Thin-Film Deposited by RF Magnetron Sputtering with Varying Substrate Temperatures

Simple item page
dc.citedby3
dc.contributor.authorGupta A.K.S.en_US
dc.contributor.authorAhamed E.M.K.I.en_US
dc.contributor.authorQuamruzzaman M.en_US
dc.contributor.authorMatin M.A.en_US
dc.contributor.authorRahaman K.S.en_US
dc.contributor.authorAmin N.en_US
dc.contributor.authorid57203811680en_US
dc.contributor.authorid57204121738en_US
dc.contributor.authorid26425182400en_US
dc.contributor.authorid57220488718en_US
dc.contributor.authorid57215115889en_US
dc.contributor.authorid7102424614en_US
dc.date.accessioned2023-05-29T08:09:18Z
dc.date.available2023-05-29T08:09:18Z
dc.date.issued2020
dc.descriptionBuffer layers; Energy gap; Film preparation; II-VI semiconductors; Infrared devices; Lime; Magnetron sputtering; Near infrared spectroscopy; Optical properties; Optoelectronic devices; Semiconducting zinc compounds; Semiconductor devices; Substrates; Sulfur compounds; Thin film solar cells; Wide band gap semiconductors; Zinc sulfide; Alternative buffer layers; Morphological properties; Multi-layer thin film; Radio frequency magnetron sputtering; rf-Magnetron sputtering; Soda lime glass substrate; Substrate temperature; UV-vis-NIR spectroscopy; Thin filmsen_US
dc.description.abstractEarth abundant and ecofriendly zinc sulphide (ZnS) is a direct wide band gap semiconductor material and applications of ZnS thin-films cover a large area including optoelectronic devices. As thin-films of ZnS are highly defective depending on fabrication process, prior to final target applications, properties of thin-films should be studied first. This study was motivated to apply ZnS thin-film as an alternative buffer layer in a chalcogenide based multilayer thin-film solar cell (TFSC) e.g. CZTS using a reliable and clean deposition technique. This study reports mainly on optical properties of ZnS thin-films with varying substrate temperatures. ZnS thin-films were deposited on soda lime glass (SLG) substrates using radio frequency (RF) magnetron sputtering. Room temperature (RT), 150� C, 300� C were taken as substrate temperature variants with RF power and argon (Ar) flow rate remained fixed at 100W and 20 SCCM respectively for all depositions. Structural properties were confirmed by XRD and optical properties were probed by UV-Vis NIR spectroscopy. It was found from structural studies that most of the films were crystallographically cubic type lattice, oriented along (111) plane with Bragg's diffraction angle at 28.95�. The average optical transmittance were found around 87% (invisible and near infrared regions of spectrum). The optical band gaps as obtained were in decreasing nature from 3.96eV to 3.71eV as substrate temperature increased from room temperature to 300�C, were in good agreement with Urbach energy analysis. Although the findings of optical properties are potentially positive, prior to apply ZnS thin-film as a buffer layer in full TFSC fabrication, more investigations will be required on electrical and morphological properties with the same investigated recipe. � 2020 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo9300428
dc.identifier.doi10.1109/PVSC45281.2020.9300428
dc.identifier.epage2648
dc.identifier.scopus2-s2.0-85099564557
dc.identifier.spage2646
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85099564557&doi=10.1109%2fPVSC45281.2020.9300428&partnerID=40&md5=918ad718ef1cda14dea58678c72b8fd5
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/25429
dc.identifier.volume2020-June
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.sourceScopus
dc.sourcetitleConference Record of the IEEE Photovoltaic Specialists Conference
dc.titleConsequence on Optical Properties of ZnS Thin-Film Deposited by RF Magnetron Sputtering with Varying Substrate Temperaturesen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS