Publication:
MATLAB/simulink cable joint modelling using S-Parameter for defect assessment

Simple item page
dc.contributor.authorKuan T.M.en_US
dc.contributor.authorSulaiman S.en_US
dc.contributor.authorAriffin A.M.en_US
dc.contributor.authorRadhi M.A.R.en_US
dc.contributor.authorid49561583600en_US
dc.contributor.authorid36562570400en_US
dc.contributor.authorid16400722400en_US
dc.contributor.authorid57203038117en_US
dc.date.accessioned2023-05-29T06:56:39Z
dc.date.available2023-05-29T06:56:39Z
dc.date.issued2018
dc.description.abstractThis study presents the simulation results of time domain reflectometry (TDR) cable system modelled using MATLAB/Simulink for defect assessment. The cable is modelled with single jointing where scattering parameters (S-parameters) is used to represent the cable joint. A series of simulations are conducted and results are then verified with the experimental results. This paper discusses the validation of the simulation results which are found to be consistent with the experimental results. Thus, the cable model is valid and can be used for assessing defects along a cable. � 2018, Institute of Advanced Scientific Research, Inc. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.epage821
dc.identifier.issue6 Special Issue
dc.identifier.scopus2-s2.0-85050365607
dc.identifier.spage815
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85050365607&partnerID=40&md5=073e4c16b32b09d3cbd8f478963c5bca
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24190
dc.identifier.volume10
dc.publisherInstitute of Advanced Scientific Research, Inc.en_US
dc.sourceScopus
dc.sourcetitleJournal of Advanced Research in Dynamical and Control Systems
dc.titleMATLAB/simulink cable joint modelling using S-Parameter for defect assessmenten_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS