Publication:
Mechanical and wear properties of aluminum coating prepared by cold spraying

Simple item page
dc.citedby7
dc.contributor.authorYusof S.N.A.en_US
dc.contributor.authorManap A.en_US
dc.contributor.authorAfandi N.M.en_US
dc.contributor.authorSalim M.en_US
dc.contributor.authorMisran H.en_US
dc.contributor.authorid56263837700en_US
dc.contributor.authorid57200642155en_US
dc.contributor.authorid57189231851en_US
dc.contributor.authorid57197124324en_US
dc.contributor.authorid6506899840en_US
dc.date.accessioned2023-05-29T06:00:08Z
dc.date.available2023-05-29T06:00:08Z
dc.date.issued2015
dc.description.abstractIn this study, aluminum (Al) powders were deposited onto Al substrates using cold spray to form a coating. The main objective is to investigate and compare the microstructure, mechanical and wear properties of Al coating to that of the Al substrate. The microstructure of the coating and substrate were observed using Scanning Electron Microscope (SEM). Hardness was evaluated using the Vickers Hardness test and wear properties were investigated using a pin-on-disk wear test machine. The elemental composition of the coating and substrate was determined using Energy-dispersive X-ray spectroscopy (EDX). Results showed that the friction coefficient and specific wear rate decreased while wear rate increased linearly with increasing load. It was found that the coating exhibit slightly better mechanical and wear properties compared to the substrate. � 2015 AIP Publishing LLC.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo4919182
dc.identifier.doi10.1063/1.4919182
dc.identifier.scopus2-s2.0-85063858373
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85063858373&doi=10.1063%2f1.4919182&partnerID=40&md5=0b575d2cbea2bf9bafa394deda6cced5
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22308
dc.identifier.volume1669
dc.publisherAmerican Institute of Physics Inc.en_US
dc.sourceScopus
dc.sourcetitleAIP Conference Proceedings
dc.titleMechanical and wear properties of aluminum coating prepared by cold sprayingen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS