Publication:
Mechanical and wear properties of aluminium coating prepared by cold spraying

Simple item page
dc.contributor.authorYusof S.N.A.en_US
dc.contributor.authorManap A.en_US
dc.contributor.authorAfandi N.F.en_US
dc.contributor.authorSalim M.A.en_US
dc.contributor.authorMisran H.en_US
dc.contributor.authorNooririnah O.en_US
dc.contributor.authorid56263837700en_US
dc.contributor.authorid57200642155en_US
dc.contributor.authorid57189231851en_US
dc.contributor.authorid57197124324en_US
dc.contributor.authorid6506899840en_US
dc.contributor.authorid56005825500en_US
dc.date.accessioned2023-05-16T02:46:14Z
dc.date.available2023-05-16T02:46:14Z
dc.date.issued2014
dc.description.abstractIn this study, aluminum (Al) powders were deposited onto Al substrates using cold spray to form a coating. The main objective is to investigate and compare the microstructure, mechanical and wear properties of Al coating to that of the Al substrate. The microstructure of the coating and substrate were observed using Scanning Electron Microscope (SEM). Hardness was evaluated using the Vickers Hardness test and wear properties were investigated using a pin-on-disk wear test machine. The elemental composition of the coating and substrate was determined using Energy-dispersive X-ray spectroscopy (EDX). Results showed that the friction coefficient and specific wear rate decreased while wear rate increased linearly with increasing load. It was found that the coating exhibit slightly better mechanical and wear properties compared to the substrate. © 2019, Microscopy Society of Malaysia. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.epage124
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85065215496
dc.identifier.spage118
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85065215496&partnerID=40&md5=1c1495f6ab75b7eeba94cc59af5ee38d
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/21949
dc.identifier.volume10
dc.publisherMicroscopy Society of Malaysiaen_US
dc.sourceScopus
dc.sourcetitleMalaysian Journal of Microscopy
dc.titleMechanical and wear properties of aluminium coating prepared by cold sprayingen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS