Publication:
Numerical Study of Composite Fiberglass Cross Arms under Statics Loading and Improvement with Sleeve Installation

Simple item page
dc.citedby10
dc.contributor.authorMohamad D.en_US
dc.contributor.authorSyamsir A.en_US
dc.contributor.authorBeddu S.en_US
dc.contributor.authorAbas A.en_US
dc.contributor.authorNg F.C.en_US
dc.contributor.authorRazali M.F.en_US
dc.contributor.authorSeman S.A.H.A.en_US
dc.contributor.authorid57200335404en_US
dc.contributor.authorid57195320482en_US
dc.contributor.authorid55812080500en_US
dc.contributor.authorid56893346700en_US
dc.contributor.authorid57192101900en_US
dc.contributor.authorid55535311300en_US
dc.contributor.authorid57200530460en_US
dc.date.accessioned2023-05-29T07:29:45Z
dc.date.available2023-05-29T07:29:45Z
dc.date.issued2019
dc.descriptionDeformation; Manufacture; ACP simulation; ANSYS software; Cross arm; Deformation and stress; Fiberglass composites; Maintenance cost; Structural deformation; Viable solutions; Glass fibersen_US
dc.description.abstractIn this paper, the structural deformation of fiberglass composite cross arms under statics loading were numerically simulated using the ANSYS software. The alternate variant of cross arms with one-meter sleeve span installed on both arms was considered as an improvement study. By comparing both cross arms systems, it is found that the total deformation was reduced from 127.49 mm to 95.367 mm by introducing the sleeve. Besides, the stress level appears to be lowered in the cross arms with sleeve installed. The sleeve is regards as a viable solution to reduce both deformation and stress level of cross arms, thus lengthen its life span and saving maintenance costs. � 2019 IOP Publishing Ltd. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo12027
dc.identifier.doi10.1088/1757-899X/530/1/012027
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85070330017
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85070330017&doi=10.1088%2f1757-899X%2f530%2f1%2f012027&partnerID=40&md5=7b2b7917f719514178c6a52cba0baccb
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24978
dc.identifier.volume530
dc.publisherInstitute of Physics Publishingen_US
dc.relation.ispartofAll Open Access, Bronze
dc.sourceScopus
dc.sourcetitleIOP Conference Series: Materials Science and Engineering
dc.titleNumerical Study of Composite Fiberglass Cross Arms under Statics Loading and Improvement with Sleeve Installationen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS