Publication:
Numerical Simulation on the Statics Deformation Study of Composite Cross Arms of Different Materials and Configurations

Simple item page
dc.citedby16
dc.contributor.authorMohamad D.en_US
dc.contributor.authorSyamsir A.en_US
dc.contributor.authorItam Z.en_US
dc.contributor.authorBakar H.A.en_US
dc.contributor.authorAbas A.en_US
dc.contributor.authorNg F.C.en_US
dc.contributor.authorRazali M.F.en_US
dc.contributor.authorSeman S.A.H.A.en_US
dc.contributor.authorid57200335404en_US
dc.contributor.authorid57195320482en_US
dc.contributor.authorid55102723400en_US
dc.contributor.authorid55566162200en_US
dc.contributor.authorid56893346700en_US
dc.contributor.authorid57192101900en_US
dc.contributor.authorid55535311300en_US
dc.contributor.authorid57200530460en_US
dc.date.accessioned2023-05-29T07:29:44Z
dc.date.available2023-05-29T07:29:44Z
dc.date.issued2019
dc.descriptionComposite materials; Deformation; Manufacture; bracing; Cross arm; Deformation and stress; Deformation studies; Static loading; static structural; Materials propertiesen_US
dc.description.abstractThis study focuses on the deformation of cross arms made from composite material under static loading. Two materials properties of fiberglass with are assigned to the cross arms model and it is subjected to a load at the one end of the cross arms. A bracing support is then installed, and the deformation and stress experienced by the cross arms are observed and compared with the case where no bracing support is used. The results obtained show that material B has lower deformation value, but experienced greater stress compared to material A. The bracing managed to reduce the total deformation by about 12% and 20% for material A and B respectively. The reduction of stresses experienced by the cross arms ranges from 4% to 30%. � 2019 IOP Publishing Ltd. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo12028
dc.identifier.doi10.1088/1757-899X/530/1/012028
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85070331242
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85070331242&doi=10.1088%2f1757-899X%2f530%2f1%2f012028&partnerID=40&md5=78259ba4e6138093631c1c62c539390f
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24977
dc.identifier.volume530
dc.publisherInstitute of Physics Publishingen_US
dc.relation.ispartofAll Open Access, Gold
dc.sourceScopus
dc.sourcetitleIOP Conference Series: Materials Science and Engineering
dc.titleNumerical Simulation on the Statics Deformation Study of Composite Cross Arms of Different Materials and Configurationsen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS