Publication:
Performance comparison of bolt withdrawal capacity for mengkulang glulam

dc.contributor.authorMalek N.J.A.en_US
dc.contributor.authorHassan R.en_US
dc.contributor.authorKamari S.N.S.M.en_US
dc.contributor.authorShakimon M.N.en_US
dc.contributor.authorLong C.Y.en_US
dc.contributor.authorid57194431409en_US
dc.contributor.authorid37028708300en_US
dc.contributor.authorid57194423050en_US
dc.contributor.authorid57189305924en_US
dc.contributor.authorid56405027200en_US
dc.date.accessioned2023-05-29T06:13:07Z
dc.date.available2023-05-29T06:13:07Z
dc.date.issued2016
dc.description.abstractIn this study, a glulam as an engineered wood product (EWP) was produced using Mengkulang. The withdrawal capacity tests were conducted on the Mengkulang Glulam using bolts of 12 mm and 16 mm in diameter for parallel and perpendicular grain directions. The results indicated that the withdrawal capacity of 12mm diameter bolt is lower than 16 mm bolt diameter by 80.16% when the bolts are inserted parallel to the grain direction. Meanwhile, the bolt withdrawal capacity for 12 mm is also lower than 16 mm by 64.82% when the bolts are inserted perpendicular to the grain direction. Twelve (12) mm bolt diameter inserted perpendicular to the grain provided higher withdrawal capacity than those inserted parallel by about 62.82%. On the other hand, the withdrawal capacity of 16 mm diameter bolt was observed to be higher in perpendicular to grain direction when compared to parallel insertion which differs by 33.82%. Hence, it can be concluded that the higher bolt diameter provides the better withdrawal capacity. The bolt performs better when it is inserted perpendicular to the grain rather than parallel to the grain directions. � 2016 Faculty of Mechanical Engineering, Universiti Teknologi MARA (UiTM), Malaysia.en_US
dc.description.natureFinalen_US
dc.identifier.epage124
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85020073093
dc.identifier.spage113
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85020073093&partnerID=40&md5=d6af6828b4fd2b345f43d6c02c7e6241
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22891
dc.identifier.volume13
dc.publisherUiTM Pressen_US
dc.sourceScopus
dc.sourcetitleJournal of Mechanical Engineering
dc.titlePerformance comparison of bolt withdrawal capacity for mengkulang glulamen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections