Publication:
Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust

Simple item page
dc.citedby88
dc.contributor.authorNaganathan S.en_US
dc.contributor.authorRazak H.A.en_US
dc.contributor.authorHamid S.N.A.en_US
dc.contributor.authorid30267872100en_US
dc.contributor.authorid9243893200en_US
dc.contributor.authorid35573270200en_US
dc.date.accessioned2023-12-29T07:46:55Z
dc.date.available2023-12-29T07:46:55Z
dc.date.issued2012
dc.description.abstractIndustrial waste incineration bottom ash and quarry dust are waste materials which, if reused, will contribute to sustainability. One of the potential uses of these materials in bulk quantities is in controlled low-strength material (CLSM). This paper evaluates the properties of controlled low-strength material (CLSM) made using industrial waste incineration bottom ash and quarry dust. Various mix proportions of CLSM containing bottom ash and quarry dust were developed and the properties evaluated. Tests were performed on the CLSM in fresh and hardened states involving flowability, stability, setting time, segregation resistance, California bearing ratio (CBR), and corrosivity and the results discussed. Results indicated that the setting time of the CLSM mixtures tested ranged from 3.7 to 8h, the fresh density from 1539 to 2100kg/m3, strength values from 0.22 to 11.42MPa, mixtures were stable and no corrosivity. It is shown that addition of quarry dust enhanced the performance of CLSM made using bottom ash with regard to stability, strength, and CBR and hence both the industrial waste incineration bottom ash and quarry dust are potential materials for use in CLSM. � 2011 Elsevier Ltd.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1016/j.matdes.2011.07.014
dc.identifier.epage63
dc.identifier.issue1
dc.identifier.scopus2-s2.0-80051497850
dc.identifier.spage56
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-80051497850&doi=10.1016%2fj.matdes.2011.07.014&partnerID=40&md5=6134fbbea97fa9070d7cd89fb50aa22a
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30343
dc.identifier.volume33
dc.pagecount7
dc.publisherElsevier Ltden_US
dc.relation.ispartofAll Open Access; Green Open Access
dc.sourceScopus
dc.sourcetitleMaterials and Design
dc.subjectA. Concrete
dc.subjectP. Environmental performance
dc.subjectP. Mechanical
dc.subjectAsh handling
dc.subjectAshes
dc.subjectCompressive strength
dc.subjectDust
dc.subjectEnvironmental management
dc.subjectMixtures
dc.subjectQuarries
dc.subjectSustainable development
dc.subjectCalifornia bearing ratio
dc.subjectControlled low strength materials
dc.subjectEnvironmental performance
dc.subjectMix proportions
dc.subjectP. Mechanical
dc.subjectPotential materials
dc.subjectSegregation resistances
dc.subjectStrength values
dc.subjectWaste incineration
dc.titleProperties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dusten_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS