Publication:
Development of Power over Fiber for Medical Devices Application

Simple item page
dc.citedby1
dc.contributor.authorBin Rahmat M.A.en_US
dc.contributor.authorLee H.J.en_US
dc.contributor.authorPradana E.en_US
dc.contributor.authorKer P.J.en_US
dc.contributor.authorElsheikh E.M.A.en_US
dc.contributor.authorThirunavakkarasu P.en_US
dc.contributor.authorid57447447700en_US
dc.contributor.authorid57447689100en_US
dc.contributor.authorid57447567600en_US
dc.contributor.authorid37461740800en_US
dc.contributor.authorid19640005100en_US
dc.contributor.authorid57208960790en_US
dc.date.accessioned2023-05-29T09:09:55Z
dc.date.available2023-05-29T09:09:55Z
dc.date.issued2021
dc.descriptionElectric power transmission; Light transmission; Multimode fibers; Copper wires; Device application; Electrical power; High-power lasers; Maintenance cost; Medical Devices; Multimodes; Power; Power over fiber; Power-transmission; High power lasersen_US
dc.description.abstractCopper wires are commonly used to transmit electrical power with several disadvantages in terms of vulnerability and maintenance cost. This project aims to demonstrate the transmission of power using optical fiber cables to power up a medical device. The objective of this project is to supply enough power to power up an Arduino microprocessor that will be connected to several sensors. A high-power laser was used as the input source, optical fiber as a medium to transmit power and a photodiode converter to convert the light energy back to electricity. Simulation work was also carried out using Optisystem to realize a much longer transmission range of up to 100 km. In the experimental work, the high-power laser was able to supply 5 V to enable an Arduino uno to operate successfully. For the simulation, it was possible to obtain 0.147 V output electrical voltage. Both the experimental and simulation works show good agreement and promise a great potential of power over fiber for future development and application. � 2021 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1109/SCOReD53546.2021.9652701
dc.identifier.epage370
dc.identifier.scopus2-s2.0-85124378754
dc.identifier.spage367
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85124378754&doi=10.1109%2fSCOReD53546.2021.9652701&partnerID=40&md5=65235845a1edcdfda468d3a165162fda
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/26394
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.sourceScopus
dc.sourcetitle19th IEEE Student Conference on Research and Development: Sustainable Engineering and Technology towards Industry Revolution, SCOReD 2021
dc.titleDevelopment of Power over Fiber for Medical Devices Applicationen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS