Publication:
Mechanical performance of engineered cementitious composite containing crumb rubber at elevated temperature

Simple item page
dc.contributor.authorAdamu M.en_US
dc.contributor.authorMohammed B.S.en_US
dc.contributor.authorWoen E.L.en_US
dc.contributor.authorYen L.Y.en_US
dc.contributor.authorBala N.en_US
dc.contributor.authorid57192979274en_US
dc.contributor.authorid57203590522en_US
dc.contributor.authorid57215507629en_US
dc.contributor.authorid57217211774en_US
dc.contributor.authorid57192979475en_US
dc.date.accessioned2023-05-29T08:09:28Z
dc.date.available2023-05-29T08:09:28Z
dc.date.issued2020
dc.descriptionAutomotive industry; Compressive strength; Construction industry; Engineered cementitious composite; Rubber; Build-up pressure; Elevated temperature; Engineered cementitious composite (ECC); Environmental concerns; Explosive spalling; Mechanical performance; Research reports; Residual compressive strength; Rubber industryen_US
dc.description.abstractThe growing amount of waste tires has raised ever-increasing environmental concern with the development of the automobile industries. Therefore, utilization of crumb rubber in Engineered Cementitious Composite (ECC) has attracted attention in the construction industry. During elevated temperature, the crumb rubber (CR) melts and creates escape routes for build-up pressure due to moisture in the matrix. This research reports the influence of crumb rubber on the residual compressive strength of ECC after exposure to elevated temperature up to 1000�C. The CR-ECC mixes were developed for utilizing crumb rubber in the percentage of 0%, 1%, 3% and 5%. The CR-ECC fresh mixtures were cast into 50 mm cube moulds and cured for 28 days. The samples were preconditioned and exposed to elevated temperature (23�C, 100�C, 200�C, 300�C, 400�C, 500�C, 600�C, 700�C, 800�C, 900�C, 1000�C) for 1-hour duration. Afterward, the samples were evaluated for residual compressive strength. However, there was no explosive spalling recorded in all the specimens used for the experiment. � Published under licence by IOP Publishing Ltd.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo12023
dc.identifier.doi10.1088/1755-1315/476/1/012023
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85086754736
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85086754736&doi=10.1088%2f1755-1315%2f476%2f1%2f012023&partnerID=40&md5=5ecbf1bf7156225c1676dd949895533a
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/25443
dc.identifier.volume476
dc.publisherInstitute of Physics Publishingen_US
dc.relation.ispartofAll Open Access, Gold
dc.sourceScopus
dc.sourcetitleIOP Conference Series: Earth and Environmental Science
dc.titleMechanical performance of engineered cementitious composite containing crumb rubber at elevated temperatureen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS