Publication:
Influence of underground cable insulation parameters on transient overvoltages

Simple item page
dc.citedby10
dc.contributor.authorFessol F.N.en_US
dc.contributor.authorMohd Ariffin A.en_US
dc.contributor.authorIllias H.A.en_US
dc.contributor.authorid55832718900en_US
dc.contributor.authorid16400722400en_US
dc.contributor.authorid26633053900en_US
dc.date.accessioned2023-12-28T04:12:52Z
dc.date.available2023-12-28T04:12:52Z
dc.date.issued2013
dc.description.abstractIt is a well-accepted fact that the protection of power system equipment is very crucial in order to ensure sustainability of electrical energy delivery. Each equipment is subjected to different types of surges and these surges can be of different amplitudes and frequencies. Depending on the severity of the transient surges, the equipment might experience very severe damages and also can cause further disruption to the overall electrical network. Failure of underground cables has always been a major concern for the electrical power distribution industries. Fault location and repair of faulty cables are expensive and time-consuming. Overvoltage phenomena such as line switching, load rejection and fault produce high frequency transients that could affect the performance of an underground cable and also the network that it is connected to. Therefore it is important to identify the factors that dictate the behaviour of a transient signal travelling along the cable. This paper will look into the simulation studies on transient behaviour when the characteristics representing the insulation of underground cables are varied. By identifying the causes that contribute to the change of cable characteristics, the effects they have on the simulated transient can be examined thoroughly. � 2013 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6564573
dc.identifier.doi10.1109/PEOCO.2013.6564573
dc.identifier.epage365
dc.identifier.scopus2-s2.0-84882800598
dc.identifier.spage362
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84882800598&doi=10.1109%2fPEOCO.2013.6564573&partnerID=40&md5=d21223c82a3abc11e84c515d16b07293
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29392
dc.pagecount3
dc.sourceScopus
dc.sourcetitleProceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013
dc.subjectEquipment
dc.subjectOptimization
dc.subjectRepair
dc.subjectUnderground cables
dc.subjectElectrical energy
dc.subjectElectrical networks
dc.subjectHigh frequency transients
dc.subjectPower system equipments
dc.subjectSimulated transients
dc.subjectSimulation studies
dc.subjectTransient overvoltages
dc.subjectTransient signal
dc.subjectCables
dc.titleInfluence of underground cable insulation parameters on transient overvoltagesen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS