Publication:
Effect of Sintering Temperature and Holding Time to the Final Characteristics of Fecral Powder Compacts Formed at Elevated Temperature Through Die Compaction Method

Simple item page
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorShahmi R.M.en_US
dc.contributor.authorRahman H.Y.en_US
dc.contributor.authorid55328831100en_US
dc.contributor.authorid57204198342en_US
dc.contributor.authorid7101793656en_US
dc.date.accessioned2023-05-29T06:50:48Z
dc.date.available2023-05-29T06:50:48Z
dc.date.issued2018
dc.descriptionAluminum alloys; Bending strength; Chromium alloys; Compaction; Iron alloys; Microstructure; Powders; Ternary alloys; Elevated temperature; Green products; Powder compacts; Pressed compacts; Relative density; Sintered samples; Sintering temperatures; Uniaxial die compaction; Sinteringen_US
dc.description.abstractThis paper presents an experimental study on the effect of sintering temperature and holding time to the final characteristics of FeCrAl powder compacts formed at 200�C through uniaxial die compaction process. The powder mass was prepared by mechanically mixing iron powder ASC 100.29 with chromium (22 wt%) and aluminum (11 wt%) for 30 min at room temperature. The powder mass was formed at 200�C by applying an axial load of 425 MPa. The as-pressed compacts termed as green products were then cooled to room temperature and subsequently sintered in argon gas fired furnace at a rate of 5�C/min for three different holding times, i.e., 30, 60, and 90 min at three different sintering temperatures, i.e., 800, 900, and 1000�C. The sintered samples were characterized for their density, bending strength, and microstructure. The results revealed that the sample sintered at 800�C for 30 min got higher relative density but lower bending strength. Sample sintered at 1000�C for 30 min achieved the higher bending strength and better microstructure. � Published under licence by IOP Publishing Ltd.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo12030
dc.identifier.doi10.1088/1742-6596/1082/1/012030
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85054911454
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85054911454&doi=10.1088%2f1742-6596%2f1082%2f1%2f012030&partnerID=40&md5=5b1e3b0a7f033da52733de030aab92aa
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/23656
dc.identifier.volume1082
dc.publisherInstitute of Physics Publishingen_US
dc.relation.ispartofAll Open Access, Bronze
dc.sourceScopus
dc.sourcetitleJournal of Physics: Conference Series
dc.titleEffect of Sintering Temperature and Holding Time to the Final Characteristics of Fecral Powder Compacts Formed at Elevated Temperature Through Die Compaction Methoden_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS