Publication:
Finite element modeling for prediction of stress - strain at several feed rates and cutting speeds for titanium (Ti-6Al-4V) alloy

Simple item page
dc.citedby1
dc.contributor.authorAli M.H.en_US
dc.contributor.authorKhidhir B.A.en_US
dc.contributor.authorMohamed B.en_US
dc.contributor.authorid54392506800en_US
dc.contributor.authorid35801121900en_US
dc.contributor.authorid35801233900en_US
dc.date.accessioned2023-12-29T07:45:45Z
dc.date.available2023-12-29T07:45:45Z
dc.date.issued2012
dc.description.abstractTitanium (Ti-6Al-4V) alloy is a desirable material for the aircraft industry because of their excellent properties behaves of high specific strength, fracture resistant characteristics, lightweight and general corrosion resistance. This paper presents a study on a two-dimensional orthogonal cutting process by using a face-milling operation through ABAQUS/EXPLICIT finite- element software. Several tests were performed at various feed rates and cutting speeds while the depth of cut remains constant. The results led to the conclusion that the stress components at integration points (Von - Mises) and the equivalent strain (PEEQ) were increased with increasing the feed rate and cutting speed during the machining process. � (2012) Trans Tech Publications, Switzerland.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.4028/www.scientific.net/AMR.587.11
dc.identifier.epage15
dc.identifier.scopus2-s2.0-84870625019
dc.identifier.spage11
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84870625019&doi=10.4028%2fwww.scientific.net%2fAMR.587.11&partnerID=40&md5=d7d74be774fce2e717ff84c494a0aa2f
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30234
dc.identifier.volume587
dc.pagecount4
dc.sourceScopus
dc.sourcetitleAdvanced Materials Research
dc.subjectCutting parameters
dc.subjectFinite element modeling
dc.subjectStress and strain
dc.subjectTitanium alloy
dc.subjectCerium alloys
dc.subjectCivil engineering
dc.subjectCorrosion resistance
dc.subjectCutting
dc.subjectCutting tools
dc.subjectMilling (machining)
dc.subjectStrength of materials
dc.subjectTitanium
dc.subjectTitanium alloys
dc.subjectAircraft industries
dc.subjectCutting parameters
dc.subjectCutting speed
dc.subjectDepth of cut
dc.subjectEquivalent strains
dc.subjectFace-milling operations
dc.subjectFeed-rates
dc.subjectFinite element modeling
dc.subjectHigh specific strength
dc.subjectIntegration points
dc.subjectMachining Process
dc.subjectOrthogonal cutting
dc.subjectStress and strain
dc.subjectStress component
dc.subjectTi-6al-4v
dc.subjectFinite element method
dc.titleFinite element modeling for prediction of stress - strain at several feed rates and cutting speeds for titanium (Ti-6Al-4V) alloyen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS