Publication:
Analysis and optimization of 275 kV transmission tower by using linear static analysis and P-delta analysis

Simple item page
dc.citedby1
dc.contributor.authorKamarudin S.A.en_US
dc.contributor.authorUsman F.en_US
dc.contributor.authorOmar R.C.en_US
dc.contributor.authorYatim M.Y.M.en_US
dc.contributor.authorid57205237033en_US
dc.contributor.authorid55812540000en_US
dc.contributor.authorid35753735300en_US
dc.contributor.authorid57205235508en_US
dc.date.accessioned2023-05-29T06:55:17Z
dc.date.available2023-05-29T06:55:17Z
dc.date.issued2018
dc.description.abstractThe increasing global population was demanded for more consumption of electricity. In Malaysia, it was reported that 17,790 megawatts (MW) was consumed in October 2017 due to high demand. The peak reading recorded is 0.011% increase compared to demand on April 2016 (17,788 MW). Following this, more transmission tower lines need to be developed to generate more electricity. Land acquisition is the main issue for constructing the new transmission tower because it requires a large area to set it up. The idea of optimization on the existing transmission tower helps in reducing cost for constructing the new structure. The aim of this study is to develop an optimal design of the transmission tower. A 275 kV transmission tower model is used in this study for analyzing and optimizing by using linear static and p-delta analysis. This optimization method is done by reducing tower members as well as increasing size of member's element. A design calculation for modification and arrangement of the transmission tower members is referred to manual guidelines of EN1993-3-1 and ASCE 10-97. Two alternatives are being prepared to produce an optimal design and result shows that a reduction percentage in term of reduced number of bar members can be saved up to 34 %. � 2018 Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.14419/ijet.v7i4.35.23098
dc.identifier.epage738
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85059228756
dc.identifier.spage734
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85059228756&doi=10.14419%2fijet.v7i4.35.23098&partnerID=40&md5=b029bf1339401144ce553a3eac59f274
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24089
dc.identifier.volume7
dc.publisherScience Publishing Corporation Incen_US
dc.sourceScopus
dc.sourcetitleInternational Journal of Engineering and Technology(UAE)
dc.titleAnalysis and optimization of 275 kV transmission tower by using linear static analysis and P-delta analysisen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS