Publication:
Development of a portable type i to III lightning surge protective device for compact structures

Simple item page
dc.citedby3
dc.contributor.authorGomes A.en_US
dc.contributor.authorAb Kadir M.Z.A.en_US
dc.contributor.authorGomes C.en_US
dc.contributor.authorKhurshid Z.M.en_US
dc.contributor.authorid56460772700en_US
dc.contributor.authorid25947297000en_US
dc.contributor.authorid57201335285en_US
dc.contributor.authorid57199152644en_US
dc.date.accessioned2023-05-29T06:50:41Z
dc.date.available2023-05-29T06:50:41Z
dc.date.issued2018
dc.descriptionBuilding wiring; Continuous time systems; Hardware; Lightning; Lightning protection; Railroad transportation; Railroads; Vehicle transmissions; Base transmission stations; Compact structures; Hardware implementations; Large structures; Lightning surges; Market researches; Surge protective devices; Transient voltage; Surge protectionen_US
dc.description.abstractLightning Surge protection of large structures is done under zonal concept due to the requirement of a system with high current handling capacity and low voltage protection level. Induction of transient voltage in the wiring system within the building is another reason for such. However, in the case of compact structures such as base transmission stations (BTS) of tower sites, outside broadcast vehicles (OBV), various stages of railway systems etc. there are no sufficient lengths in the wiring network for implementing SPDs in such zonal-segment scenario. Also due to the remoteness of most BTSs and need for regular and/or continuous usage of OBVs and railway systems, the time-consuming replacement of outof-order fixed SPDs is most often not warranted. In this backdrop, it was proposed to develop a portable/pluggable system of coordinated SPDs with high current handling capacity and low voltage protection level. A compact SPD system that is capable of handling high currents (50 kA) with low let through voltage (1 kV) was designed using PSCAD and a thorough market research was conducted to identify products that satisfied the requirements of the system designed in PSCAD. Type I and III SPDs capable of handling 50 kA and 2.5 kA respectively, were identified and used for the hardware implementation of the system. Elimination of the type II SPD made the design more compact and better suited for applications at space-restricted locations. � 2018 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo8503368
dc.identifier.doi10.1109/ICLP.2018.8503368
dc.identifier.scopus2-s2.0-85056829791
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85056829791&doi=10.1109%2fICLP.2018.8503368&partnerID=40&md5=3761c05acd1fc00ee8287934335e6989
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/23641
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.relation.ispartofAll Open Access, Green
dc.sourceScopus
dc.sourcetitle34th International Conference on Lightning Protection, ICLP 2018
dc.titleDevelopment of a portable type i to III lightning surge protective device for compact structuresen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS