Publication:
Investigation of distributed generation units placement and sizing based on voltage stability condition indicator (VSCI)

Simple item page
dc.citedby8
dc.contributor.authorRaj A.en_US
dc.contributor.authorAb Aziz N.F.en_US
dc.contributor.authorYasin Z.M.en_US
dc.contributor.authorSalim N.A.en_US
dc.contributor.authorid57211314103en_US
dc.contributor.authorid57221906825en_US
dc.contributor.authorid57211410254en_US
dc.contributor.authorid36806685300en_US
dc.date.accessioned2023-05-29T07:23:49Z
dc.date.available2023-05-29T07:23:49Z
dc.date.issued2019
dc.description.abstractVoltage instability in power distribution systems can result in voltage collapse throughout the grid. Today, with the advanced of power generation technology from renewable sources, concerns of utility companies are much being focused on the stability of the grid when there is an integration of distributed generation (DG) in the system. This paper presents a study on DG units� placement and sizing in a radial distribution network by using a pre-developed index called Voltage Stability Condition Index (VSCI). In this paper, VSCI is used to determine DG placement candidates, while the value of power losses is used to identify the best DG placement. The proposed method is tested on a standard 33-bus radial distribution network and compared with existing Ettehadi and Aman methods. The effectiveness of the method is presented in terms of reduction in power system losses, maximization of system loadability and voltage quality improvement. Results show that VSCI can be utilized as the voltage stability indicator for DG placement in radial distribution power system. The integration of DG is found to improve voltage stability by increasing the system loadability and reducing the power losses of the network. � 2019 Institute of Advanced Engineering and Science. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.11591/ijpeds.v10.i3.pp1317-1323
dc.identifier.epage1323
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85073456451
dc.identifier.spage1317
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85073456451&doi=10.11591%2fijpeds.v10.i3.pp1317-1323&partnerID=40&md5=489aaf96d634ff36aeffd471643c0d52
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24475
dc.identifier.volume10
dc.publisherInstitute of Advanced Engineering and Scienceen_US
dc.relation.ispartofAll Open Access, Gold, Green
dc.sourceScopus
dc.sourcetitleInternational Journal of Power Electronics and Drive Systems
dc.titleInvestigation of distributed generation units placement and sizing based on voltage stability condition indicator (VSCI)en_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS