Publication:
Multi objective optimization of surface roughness and workpiece surface temperature in turning operation

Simple item page
dc.contributor.authorNooraziah A.en_US
dc.contributor.authorTiagrajah V.J.en_US
dc.contributor.authorid55263605500en_US
dc.contributor.authorid35198314400en_US
dc.date.accessioned2023-05-16T02:47:23Z
dc.date.available2023-05-16T02:47:23Z
dc.date.issued2014
dc.description.abstractThis paper presents the optimization of multiple performance characteristics (surface roughness and workpiece surface temperature) based on the Taguchi method. Three controllable factors of the turning process were studied at three levels. The single objective optimization was conducted using Taguchi method. The multiple Signal-to-Noise (MSNR) value was used to correspond to multi objective cases. The optimum combination of cutting parameters was obtained based on the highest value of MSNR. © (2014) Trans Tech Publications, Switzerland.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.4028/www.scientific.net/AMM.554.376
dc.identifier.epage380
dc.identifier.scopus2-s2.0-84903549298
dc.identifier.spage376
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84903549298&doi=10.4028%2fwww.scientific.net%2fAMM.554.376&partnerID=40&md5=9bbe560f61413357f6744a456df9c824
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22101
dc.identifier.volume554
dc.publisherTrans Tech Publications Ltden_US
dc.sourceScopus
dc.sourcetitleApplied Mechanics and Materials
dc.titleMulti objective optimization of surface roughness and workpiece surface temperature in turning operationen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS