Publication:
S55c carbon steel for heat treatment process with different medium in attenuation measurement using ultrasonic testing

Simple item page
dc.citedby3
dc.contributor.authorAli K.en_US
dc.contributor.authorPaw J.K.S.en_US
dc.contributor.authorAizat M.Sulaiman M.en_US
dc.contributor.authorAbdalla A.N.en_US
dc.contributor.authorHen C.K.en_US
dc.contributor.authorDing T.J.en_US
dc.contributor.authorid36130958600en_US
dc.contributor.authorid22951210700en_US
dc.contributor.authorid57188663593en_US
dc.contributor.authorid56050971600en_US
dc.contributor.authorid36994481200en_US
dc.contributor.authorid38863172300en_US
dc.date.accessioned2023-05-29T06:54:09Z
dc.date.available2023-05-29T06:54:09Z
dc.date.issued2018
dc.description.abstractUltrasonic testing or commonly known as UT is one of the non-destructive testing technique and widely used in oil and gas industrial inspection. This technique mostly used in defect or crack identification of the pipeline and also used for flaw detection/evaluation, dimensional measurements, and material characterization. This paper presents the effect of heat treatment for S55C carbon steel in attenuation measurement by using ultrasonic testing including annealing, tempering, and quenching process. Seawater and oil are used as a medium of quenching process. The fixed excitation frequency at 4 MHz is used and 0 degrees with double crystal is implemented in this measurement. The thicknesses of blocks used are as the sample from 30mm until 80mm. The result shows that the measurement of material attenuation will be decreased after annealing, tempering and quenching process from 40% until 99% compared to before the heat treatment process. The highest attenuation decreasing can be seen on the sample block with the 30mm thickness in the heat treatment process. � 2018 Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.14419/ijet.v7i4.35.22904
dc.identifier.epage533
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85059245697
dc.identifier.spage527
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85059245697&doi=10.14419%2fijet.v7i4.35.22904&partnerID=40&md5=4cd03d6fb4220ab504498e22be80ac50
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24003
dc.identifier.volume7
dc.publisherScience Publishing Corporation Incen_US
dc.relation.ispartofAll Open Access, Bronze, Green
dc.sourceScopus
dc.sourcetitleInternational Journal of Engineering and Technology(UAE)
dc.titleS55c carbon steel for heat treatment process with different medium in attenuation measurement using ultrasonic testingen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS