Publication:
Performance of carbide cutting tools when machining of nickel based alloy

Simple item page
dc.citedby7
dc.contributor.authorNoor M.M.en_US
dc.contributor.authorKadirgama K.en_US
dc.contributor.authorHabeeb H.H.en_US
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorMohammad B.en_US
dc.contributor.authorid55196353400en_US
dc.contributor.authorid12761486500en_US
dc.contributor.authorid18041935600en_US
dc.contributor.authorid55611634700en_US
dc.contributor.authorid35801233900en_US
dc.date.accessioned2023-12-29T07:51:56Z
dc.date.available2023-12-29T07:51:56Z
dc.date.issued2010
dc.description.abstractThis paper was investigated the behavior of cutting tools when machining of nickel based alloys 242. Experiments were conducted using four different cutting tool materials under wet condition. Tool failure modes and wear mechanism were examined at various cutting parameters. Flank wear found to be the predominant tool wear for all cutting tools especially with CVD tools. Attrition lead to exposure and build up edge of the wear mechanisms were observed in all cutting tools. Coating is observed to be delaminated as main phenomena on cutting tools surfaces. The obtained results are PVD cutting tools perform better than CVD in terms of tool life with machining parameters. � 2010 Springer-Verlag France.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1007/s12289-010-0810-4
dc.identifier.epage478
dc.identifier.issueSUPPL. 1
dc.identifier.scopus2-s2.0-78651543771
dc.identifier.spage475
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-78651543771&doi=10.1007%2fs12289-010-0810-4&partnerID=40&md5=12a294fa99fc4c4a8aab5abdd81b1fa6
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30723
dc.identifier.volume3
dc.pagecount3
dc.sourceScopus
dc.sourcetitleInternational Journal of Material Forming
dc.subjectFlank wear
dc.subjectNickel alloy 242
dc.subjectSurface roughness
dc.subjectTool life
dc.subjectTool wear
dc.subjectAlloys
dc.subjectCarbides
dc.subjectCerium alloys
dc.subjectFailure analysis
dc.subjectMachine tools
dc.subjectMachining
dc.subjectMetal working tools
dc.subjectNickel
dc.subjectNickel alloys
dc.subjectSurface properties
dc.subjectSurface roughness
dc.subjectTribology
dc.subjectWear of materials
dc.subjectWelds
dc.subjectCutting parameters
dc.subjectFlank wear
dc.subjectMachining parameters
dc.subjectNickel based alloy
dc.subjectTool life
dc.subjectTool wear
dc.subjectTool-failure mode
dc.subjectWear mechanisms
dc.subjectWet conditions
dc.subjectCutting tools
dc.titlePerformance of carbide cutting tools when machining of nickel based alloyen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS