Publication:
Effects of sintering temperature to the mechanical properties and microstructures of Fe 67 Cr 22 Al 11 powder compacts

Simple item page
dc.citedby2
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorNamasivayam D.en_US
dc.contributor.authorRahman H.Y.en_US
dc.contributor.authorid55328831100en_US
dc.contributor.authorid57193703054en_US
dc.contributor.authorid7101793656en_US
dc.date.accessioned2023-05-29T06:00:55Z
dc.date.available2023-05-29T06:00:55Z
dc.date.issued2015
dc.description.abstractThis paper presents an experimental investigation on the effects of sintering temperature to the mechanical properties and microstructures of FeCrAl powder compacts formed through warm powder compaction route. Elemental iron powder ASC 100.29, copper and aluminum powder were blended mechanically in a low speed mixer. The blended powder mass was compacted at a temperature of 200�C and was later sintered in an argon gas fired furnace by varying the sintering temperature, i.e., 600�C, 750�C and 900�C for 90 minutes. The sintered products were then subjected to density measurement, flexure strength measurement as well as microstructure analysis through scanning electron microscopy. The results revealed that the suitable sintering temperature is 600�C which generated light weight products with higher bending strength, lower volumetric expansion, and better microstructure. � 2019, Microscopy Society of Malaysia. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.epage78
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85042318726
dc.identifier.spage74
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85042318726&partnerID=40&md5=b95ebfadf8798d6371b098f5225b7cfa
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/22430
dc.identifier.volume11
dc.publisherMicroscopy Society of Malaysiaen_US
dc.sourceScopus
dc.sourcetitleMalaysian Journal of Microscopy
dc.titleEffects of sintering temperature to the mechanical properties and microstructures of Fe 67 Cr 22 Al 11 powder compactsen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS