Publication:
Effect of sintering holding time on lowtemperature degradation of yttria stabilized zirconia ceramics

dc.citedby6
dc.contributor.authorSutharsini U.en_US
dc.contributor.authorRamesh S.en_US
dc.contributor.authorWong Y.H.en_US
dc.contributor.authorMisran H.en_US
dc.contributor.authorYusuf F.en_US
dc.contributor.authorTan C.Y.en_US
dc.contributor.authorPurbolaksono J.en_US
dc.contributor.authorTeng W.D.en_US
dc.contributor.authorid55763631900en_US
dc.contributor.authorid41061958200en_US
dc.contributor.authorid36605495300en_US
dc.contributor.authorid6506899840en_US
dc.contributor.authorid56450508200en_US
dc.contributor.authorid16029485400en_US
dc.contributor.authorid8621252500en_US
dc.contributor.authorid36855788900en_US
dc.date.accessioned2023-05-12T16:17:56Z
dc.date.available2023-05-12T16:17:56Z
dc.date.issued2014
dc.description.abstractEffect of sintering holding time on low-temperature degradation of 3 mol-% yttria stabilised zirconia was investigated. Yttria stabilised zirconia samples were sintered using a two-step sintering cycle. The samples were initially heated to 1500°C with the heating rate of 10°C min-1, held for 1 minute before cooling down to 1200°C and kept at this temperature for varying holding times from 0 to 10 hours. The phase contents of the zirconia samples were measured using X-ray diffractometer, and the microstructural evaluation was evaluated by field emission scanning electron microscope. All the as-sintered samples exhibited 100% tetragonal phase and bulk density of about 6 g cm-3. The low-temperature degradation study was conducted under autoclave condition containing superheated steam at 180°C and 10 bar vapour pressure for periods up to 24 hours. The results showed that the tetragonal to monoclinic phase transformation decreased with increasing holding time up to 3 hours and thereafter it increased. The sample sintered with 3-hour holding time showed better aging resistance than other samples. It was found that the grain size of this sample was the lowest (0 29 ?m) when compared to other samples. © 2014 W. S. Maney & Son Ltd.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1179/1432891714Z.000000000988
dc.identifier.epage408-S6-411
dc.identifier.scopus2-s2.0-84918843421
dc.identifier.spageS6
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84918843421&doi=10.1179%2f1432891714Z.000000000988&partnerID=40&md5=047d6d524a2550629ac7c33f6a2b4fdc
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/21814
dc.identifier.volume18
dc.publisherManey Publishingen_US
dc.sourceScopus
dc.sourcetitleMaterials Research Innovations
dc.titleEffect of sintering holding time on lowtemperature degradation of yttria stabilized zirconia ceramicsen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections