Publication:
Design and optimization of the housing of spray unit of a linear motor operated spray gun

Simple item page
dc.citedby5
dc.contributor.authorParvez Iqbal A.K.M.en_US
dc.contributor.authorAris I.en_US
dc.contributor.authorRahman M.M.en_US
dc.contributor.authorMisron N.en_US
dc.contributor.authorid54416214600en_US
dc.contributor.authorid6603306751en_US
dc.contributor.authorid55328831100en_US
dc.contributor.authorid6505728008en_US
dc.date.accessioned2023-12-28T04:12:59Z
dc.date.available2023-12-28T04:12:59Z
dc.date.issued2013
dc.description.abstractPneumatic system is normally used to trigger the automatic spray gun for conventional spray operations. Highly skilled labors and a number of adjustable knobs are required to produce the high quality coating works using the conventional automatic spray gun which is cost intensive. Therefore, linear motor operated multiple spray operations spray gun has been developed. This spray gun consists of two spray units, an air control and supply unit and a triggering unit to carry out the multiple spray operations. This paper focuses on the design optimization and fabrication of the housing of the spray units which hold fluid nozzles, air nozzles, an assembly cap, a needle valve or a ball valve. In the air less and air assisted airless spray systems, high pressurized liquid is passed through the nozzle which is held by the housing of the spray unit. Before entering into the nozzle, the high pressurized liquid is passed through the housing. For the simplicity of the analysis, it is assumed that the housing is an open-ended pressure vessel. From the analysis, dimensions and material selection have been optimized and finally the spray units have been fabricated and tested. During the performance test it is seen that satisfactory transfer efficiency of spray operation has been achieved by using newly developed spray housing of the spray units, which proves the stability of the spray housing during high pressure operation.en_US
dc.description.natureFinalen_US
dc.identifier.epage5175
dc.identifier.issue8
dc.identifier.scopus2-s2.0-84884404660
dc.identifier.spage5167
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84884404660&partnerID=40&md5=a0beb8ccaed75e04f7746e365ec03557
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29415
dc.identifier.volume6
dc.pagecount8
dc.sourceScopus
dc.sourcetitleIndian Journal of Science and Technology
dc.subjectDeflection analysis
dc.subjectDesign
dc.subjectFailure analysis
dc.subjectPressure vessel
dc.subjectSpray gun
dc.subjectSpray process
dc.titleDesign and optimization of the housing of spray unit of a linear motor operated spray gunen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS