Publication:
The effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steel

Simple item page
dc.citedby1
dc.contributor.authorYousif B.F.en_US
dc.contributor.authorEl-Tayeb N.S.en_US
dc.contributor.authorYusaf T.F.en_US
dc.contributor.authorid55886099400en_US
dc.contributor.authorid12344533100en_US
dc.contributor.authorid23112065900en_US
dc.date.accessioned2023-12-28T08:57:39Z
dc.date.available2023-12-28T08:57:39Z
dc.date.issued2006
dc.description.abstractThis paper presents an experimental investigation to study friction and interface temperature characteristics of chopped strand mat fiberglass (type-R) reinforced polyester (CGRP) sliding against smooth stainless steel. Pin-on-disk (POD) apparatus is used to perform the experimental tests under dry sliding condition at room temperature. Several parameters are considered, namely load (30, 60 & 90N), sliding velocity (2.8, 3.52 & 3.9m/s) and sliding distance (0-2.51km). Three different orientations of chopped strand mat with respect to sliding direction, Parallel (P), Anti-parallel (AP) and Normal orientations (N) are investigated. Continuous measurements of friction forces using strain gauges, and interface temperatures using infrared thermometer are performed. In addition, Scanning electron microscopy (SEM) is used to study the worn surface to verify the results. Experimental results show that specimen's orientations and the tested parameters play a major role in controlling friction and interface temperature characteristics of the CGRP/stainless steel. Maximum friction coefficient was taken place in AP orientation at 3.5 m/s and 2.5km, which was about 0.6. Although, AP-orientation had higher friction interface temperature in comparing to P and N-orientations, which was about 48�C at 3.9m/s and 2.5km. Copyright � 2006 by ASME.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1115/esda2006-95171
dc.identifier.scopus2-s2.0-33845786081
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-33845786081&doi=10.1115%2fesda2006-95171&partnerID=40&md5=42fb4e0e4c026a85040f31fc56053f37
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29782
dc.identifier.volume2006
dc.pagecount8
dc.publisherAmerican Society of Mechanical Engineersen_US
dc.sourceScopus
dc.sourcetitleProceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006
dc.subjectFriction
dc.subjectLoads (forces)
dc.subjectPolyesters
dc.subjectSliding mode control
dc.subjectStainless steel
dc.subjectStrain gages
dc.subjectThermal effects
dc.subjectVelocity measurement
dc.subjectMat fiberglass
dc.subjectPin on disk (POD)
dc.subjectSliding distances
dc.subjectReinforced plastics
dc.titleThe effects of load and velocity on friction and interface temperature of CGRP sliding against smooth stainless steelen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS