Publication:
PERFORMANCE OF A PIEZOELECTRIC ENERGY HARVESTER WITH RUBBER COMPOUND MODIFICATION

Simple item page
dc.citedby0
dc.contributor.authorMuhamad L.en_US
dc.contributor.authorSaparin M.A.en_US
dc.contributor.authorSalleh H.en_US
dc.contributor.authorid56951116100en_US
dc.contributor.authorid58645527600en_US
dc.contributor.authorid24067645400en_US
dc.date.accessioned2025-03-03T07:48:07Z
dc.date.available2025-03-03T07:48:07Z
dc.date.issued2024
dc.description.abstractRecently, there has been a significant increase in the research on Piezoelectric energy harvester. Piezoelectric energy harvester is capable of producing electrical charge when mechanically deformed. The application is to be used to power up mobile electronic. The common problem in the piezoelectric energy harvester is the material is brittle and causes fatigue failure at the same time the material is relatively costly. One of the method to address this problem is to add a rubber compound layer which can improve the flexibility and power output of the energy harvester. It can also improve the cost per output density of the piezoelectric energy harvester because the rubber compound has low cost. But, currently none of existing literatures explore into this type application. Thus, the objective of this paper is to investigate the voltage output and effectiveness of piezoelectric energy harvester with rubber compound modification. The test in the laboratory was set up to optimize PZT (Lead Zirconate Titanate) Energy Harvester cantilever beams using rubber compound layer as modification. The tests were conducted using frequency range of 30 Hz to 70 Hz with fixed RMS 0.25g acceleration. The result shows promising output for the PZT energy harvester with rubber compound, with an increase of between 16.6% to 61.2% open circuit voltage when compared to the standard PZT. ? 2024 Institute of Physics Publishing. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo12002
dc.identifier.doi10.1088/1742-6596/2721/1/012002
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85189325176
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85189325176&doi=10.1088%2f1742-6596%2f2721%2f1%2f012002&partnerID=40&md5=fdd071e8479bec45a95f2d4fb9557043
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/37160
dc.identifier.volume2721
dc.publisherInstitute of Physicsen_US
dc.relation.ispartofAll Open Access; Gold Open Access
dc.sourceScopus
dc.sourcetitleJournal of Physics: Conference Series
dc.subjectBrittle fracture
dc.subjectEnergy harvesting
dc.subjectLead zirconate titanate
dc.subjectOpen circuit voltage
dc.subjectPiezoelectricity
dc.subjectCompound layer
dc.subjectCompound modifications
dc.subjectElectrical charges
dc.subjectEnergy Harvester
dc.subjectFatigue failures
dc.subjectMobile electronics
dc.subjectPerformance
dc.subjectPiezoelectric energy harvesters
dc.subjectPower
dc.subjectPZT
dc.subjectRubber
dc.titlePERFORMANCE OF A PIEZOELECTRIC ENERGY HARVESTER WITH RUBBER COMPOUND MODIFICATIONen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS