Publication:
Harvesting waste heat energy from automobile engine exhaust using teg with heat pipes

Simple item page
dc.contributor.authorBalakrishnan A.S.en_US
dc.contributor.authorNagi F.en_US
dc.contributor.authorSalleh K.en_US
dc.contributor.authorGunnasegaran P.A.L.en_US
dc.contributor.authorid57205236148en_US
dc.contributor.authorid56272534200en_US
dc.contributor.authorid57218170038en_US
dc.contributor.authorid35778031300en_US
dc.date.accessioned2023-05-29T06:54:36Z
dc.date.available2023-05-29T06:54:36Z
dc.date.issued2018
dc.description.abstractThis research investigates how the heat from car exhaust pipe line can be recovered as power using passive Thermo electric generator (TEG) using heat pipes. In this research the heat pipes are place on the cold side of TEG to remove the rising temperature and hot side of TEG is placed on the circumference of exhaust pipe line of car engine. The heat pipes with and without nano-fluids were placed on cold side of TEGs to investigate heat removal from increasing temperature and too maintain constant temperature on cold side. On the basis of results from 3D finite element simulations and experiments in the setup, the heat flow, voltage, and current were measured. The method presented in this paper gives detailed insight into how TEG modules perform in general, and also enables prediction of potential improvement in module performance by using different nano-fluids as coolants and Preliminary results were obtained. The results of Finite Element Analysis are analogous with the experimental results of TEG with water filled heat pipes with minimal possible errors. Therefore, the performance of nano-fluids in heat pipes are numerically evaluated and proposal are made for the enhancement of Module power outputs in Harnessing exhaust heat energy. � 2018 Authors.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.14419/ijet.v7i4.35.22332
dc.identifier.epage92
dc.identifier.issue4
dc.identifier.scopus2-s2.0-85059238271
dc.identifier.spage85
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85059238271&doi=10.14419%2fijet.v7i4.35.22332&partnerID=40&md5=ae5670460023c64c45c7a9f0e11b55d4
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/24034
dc.identifier.volume7
dc.publisherScience Publishing Corporation Incen_US
dc.sourceScopus
dc.sourcetitleInternational Journal of Engineering and Technology(UAE)
dc.titleHarvesting waste heat energy from automobile engine exhaust using teg with heat pipesen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS