Publication:
Design of a novel SPWM based on bat-like reference signal technique for EV applications

Simple item page
dc.citedby1
dc.contributor.authorKhalil Al- Jafeary I.M.en_US
dc.contributor.authorTan N.M.L.en_US
dc.contributor.authorid57210445825en_US
dc.contributor.authorid24537965000en_US
dc.date.accessioned2023-05-29T08:06:42Z
dc.date.available2023-05-29T08:06:42Z
dc.date.issued2020
dc.descriptionElectric inverters; Electromagnetic pulse; Signal processing; Voltage control; Reference signals; Single-frequency; Sinusoidal pulse width modulation; Switching techniques; Switching transitions; Three phase vsi; Three-phase voltage source inverters; Total harmonics distortions; Switchingen_US
dc.description.abstractThe sinusoidal pulse-width modulation (SPWM) technique is typically used for three-phase voltage source inverter (VSI) in low-voltage motor drives due to its simplicity and reliability. However, these VSI face increasing challenge to minimize electromagnetic interference (EMI) and increase power quality. This paper proposes a new SPWM switching based on a Bat-like reference signal that has the advantages of minimizing the output-voltage total harmonics distortion (THDv), lowering the switch rate of change in voltage (dv/dt), reducing the number of switching transitions, and increasing the peak and r.m.s. ac output voltage of the three-phase VSI. The proposed switching technique is verified using Matlab/Simulik on a 2-kW, 300-V three-phase VSI connected to an RL load. This technique shows improvement in reducing the output-voltage THDv by 36% and lowering the number of switching transition by 60% as compared to SPWM switching that is based on singlefrequency signal. Moreover, the dv/dt is low and the peak output voltage is increase by approximately 17%. � 2020 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo9314525
dc.identifier.doi10.1109/PECon48942.2020.9314525
dc.identifier.epage76
dc.identifier.scopus2-s2.0-85100530251
dc.identifier.spage71
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85100530251&doi=10.1109%2fPECon48942.2020.9314525&partnerID=40&md5=d7144b6cf9adef3bfca2ef912e82d0b9
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/25081
dc.publisherInstitute of Electrical and Electronics Engineers Inc.en_US
dc.sourceScopus
dc.sourcetitlePECon 2020 - 2020 IEEE International Conference on Power and Energy
dc.titleDesign of a novel SPWM based on bat-like reference signal technique for EV applicationsen_US
dc.typeConference Paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS