Publication:
Selecting of cutting parameters from prediction model of cutting force for turning nickel based hastelloy C-276 using response surface methodology

Simple item page
dc.citedby7
dc.contributor.authorKhidhir B.A.en_US
dc.contributor.authorMohamed B.en_US
dc.contributor.authorid35801121900en_US
dc.contributor.authorid35801233900en_US
dc.date.accessioned2023-12-29T07:55:47Z
dc.date.available2023-12-29T07:55:47Z
dc.date.issued2009
dc.description.abstractIndustries around the world continually strive for lower cost solutions with reduced lead time in order to maintain their competitiveness. Traditionally, most Nickel based super alloy parts are hard machining. Machinability consideration of nickel based Hastelloy C-276 in turning operations has been carried out using ceramic inserts under dry conditions. Hastelloy C-276 is a difficult-to-machine material because of its low thermal diffusive property and high strength at high temperature. This paper describes the selecting of a cutting speed and feed rate from the charts that depends on cutting force model for turning Hastelloy C-276 utilizing response surface methodology. The model found to be accurate based on the variance analysis and the predicted value is closer with the experimental result. On - line monitoring used through High speed camera. This technique shows its benefits when analyzing the cutting path. From the detailed pictures one can easily observe that the selecting of the machining parameters not the only factors that depends on the cutting force but also another factors such as the chatter occurred during cutting that caused by round inserts or by burr formation occur during cutting and increase sincerely when approach angles increasingly from 45� to 95� consequently and its effected by increasing the feed rate as a result. The pictures gave good evidence that the observation during cutting must included in the chart to select the accurate magnitude for cutting parameters such as cutting speed, feed rate and depth of cut. � EuroJournals Publishing, Inc. 2009.en_US
dc.description.natureFinalen_US
dc.identifier.epage535
dc.identifier.issue3
dc.identifier.scopus2-s2.0-68349135005
dc.identifier.spage525
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-68349135005&partnerID=40&md5=9a99932ce38926e3691eb3ab7dec5ff4
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30914
dc.identifier.volume33
dc.pagecount10
dc.publisherEuroJournals, Inc.en_US
dc.sourceScopus
dc.sourcetitleEuropean Journal of Scientific Research
dc.subjectCutting speed
dc.subjectFirst order (linear + interaction)
dc.subjectHigh speed camera
dc.subjectSurface response methodology
dc.titleSelecting of cutting parameters from prediction model of cutting force for turning nickel based hastelloy C-276 using response surface methodologyen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS