Publication:
Mos2/h-bn/graphene heterostructure and plasmonic effect for self-powering photodetector: A review

dc.citedby12
dc.contributor.authorSundararaju U.en_US
dc.contributor.authorHaniff M.A.S.M.en_US
dc.contributor.authorKer P.J.en_US
dc.contributor.authorMenon P.S.en_US
dc.contributor.authorid57218951861en_US
dc.contributor.authorid57212061586en_US
dc.contributor.authorid37461740800en_US
dc.contributor.authorid57201289731en_US
dc.date.accessioned2023-05-29T09:08:36Z
dc.date.available2023-05-29T09:08:36Z
dc.date.issued2021
dc.descriptionBoron nitride; Electric power systems; Flexible electronics; Graphene; III-V semiconductors; Layered semiconductors; Light absorption; Molybdenum compounds; Photocurrents; Photons; Plasmonic nanoparticles; Plasmonics; Signal detection; Sulfur compounds; Absorption and scatterings; Comprehensive analysis; External power supplies; Fabrication and characterizations; Hexagonal boron nitride (h-BN); Material characterizations; Photocurrent generations; Research opportunities; Photodetectorsen_US
dc.description.abstractA photodetector converts optical signals to detectable electrical signals. Lately, self-powered photodetectors have been widely studied because of their advantages in device miniaturization and low power consumption, which make them preferable in various applications, especially those related to green technology and flexible electronics. Since self-powered photodetectors do not have an external power supply at zero bias, it is important to ensure that the built-in potential in the device produces a sufficiently thick depletion region that efficiently sweeps the carriers across the junction, resulting in detectable electrical signals even at very low-optical power signals. Therefore, two-dimensional (2D) materials are explored as an alternative to silicon-based active regions in the photodetector. In addition, plasmonic effects coupled with self-powered photodetectors will further enhance light absorption and scattering, which contribute to the improvement of the device�s photocurrent generation. Hence, this review focuses on the employment of 2D materials such as graphene and molybdenum disulfide (MoS2) with the insertion of hexagonal boron nitride (h-BN) and plasmonic nanoparticles. All these approaches have shown performance improvement of photodetectors for self-powering applications. A comprehensive analysis encompassing 2D material characterization, theoretical and numerical modelling, device physics, fabrication and characterization of photodetectors with graphene/MoS2 and graphene/h-BN/MoS2 heterostructures with plasmonic effect is presented with potential leads to new research opportunities. � 2021 by the authors. Licensee MDPI, Basel, Switzerland.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo1672
dc.identifier.doi10.3390/ma14071672
dc.identifier.issue7
dc.identifier.scopus2-s2.0-85103897587
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85103897587&doi=10.3390%2fma14071672&partnerID=40&md5=421d0751ee1471d88185e595f6e6c626
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/26278
dc.identifier.volume14
dc.publisherMDPI AGen_US
dc.relation.ispartofAll Open Access, Gold, Green
dc.sourceScopus
dc.sourcetitleMaterials
dc.titleMos2/h-bn/graphene heterostructure and plasmonic effect for self-powering photodetector: A reviewen_US
dc.typeReviewen_US
dspace.entity.typePublication
Files
Collections