Publication:
Evaluation on reheater tube failure

Simple item page
dc.citedby27
dc.contributor.authorPurbolaksono J.en_US
dc.contributor.authorHong Y.W.en_US
dc.contributor.authorNor S.S.M.en_US
dc.contributor.authorOthman H.en_US
dc.contributor.authorAhmad B.en_US
dc.contributor.authorid8621252500en_US
dc.contributor.authorid26024539700en_US
dc.contributor.authorid23492827600en_US
dc.contributor.authorid25228759600en_US
dc.contributor.authorid36781813400en_US
dc.date.accessioned2023-12-29T07:55:40Z
dc.date.available2023-12-29T07:55:40Z
dc.date.issued2009
dc.description.abstractThis paper presents investigation study on the failed reheater tube by finite element modeling, dimensional measurements and microscopic examinations. The failed tube was situated in horizontal position and facing directly to the incoming hot flue gas from furnace region. Scale thickness of as-received tube samples of the failed tube and its neighbor tubes is measured in order to estimate the average scale growth rates. The estimated scale growth rate is used to generate geometries of the scale for finite element models. Operational and allowable stresses of the tube at the corresponding average tube temperatures and service hours are presented. Results obtained from finite element analysis are shown to be in good conformity with the findings from the microscopic examination. � 2008 Elsevier Ltd. All rights reserved.en_US
dc.description.natureFinalen_US
dc.identifier.doi10.1016/j.engfailanal.2008.06.008
dc.identifier.epage537
dc.identifier.issue1
dc.identifier.scopus2-s2.0-53849122954
dc.identifier.spage533
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-53849122954&doi=10.1016%2fj.engfailanal.2008.06.008&partnerID=40&md5=d82956f4c4b6d82d87868890e65cf8be
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30908
dc.identifier.volume16
dc.pagecount4
dc.sourceScopus
dc.sourcetitleEngineering Failure Analysis
dc.subjectFailure analysis
dc.subjectFinite element modeling
dc.subjectOxide scales
dc.subjectReheater tube
dc.subjectFinite element method
dc.subjectFlue gases
dc.subjectMicroscopic examination
dc.subjectReal time systems
dc.subjectScale (deposits)
dc.subjectFailure analysis
dc.subjectFinite element modeling
dc.subjectOxide scales
dc.subjectReheater tube
dc.subjectTubes (components)
dc.titleEvaluation on reheater tube failureen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS