Publication:
Electron Beam Cross-Linking of Carbon Black Filled NR/LLDPE Blends

Simple item page
dc.citedby10
dc.contributor.authorAhmad A.en_US
dc.contributor.authorMohd D.Hj.en_US
dc.contributor.authorAbdullah I.en_US
dc.contributor.authorid16306307100en_US
dc.contributor.authorid6507754853en_US
dc.contributor.authorid55434717500en_US
dc.date.accessioned2023-12-28T08:58:14Z
dc.date.available2023-12-28T08:58:14Z
dc.date.issued2003
dc.description.abstractBlends of NR/LLDPE were prepared by melt blending in a Haake Rheomix at 140�C with a rotor speed of 50 rpm and 15 min mixing. Liquid natural rubber (LNR) and carbon black were incorporated into the blend as a compatibilizer and filler, respectively. The effect of electron beam irradiation on the properties of carbon black filled NR/LLDPE blends has been studied over a range of radiation doses and loadings. Compared to unfilled irradiated NR/LLDPE blends, tensile strength and modulus at 100% increase with increase in the amount of the carbon black filler. Similar improvements in these properties are observed with an increase In both the radiation dose and the amount of the filler up to a certain level. The results are explained with the help of insoluble gel content and swelling index analysis. It is observed that higher reinforcement in the case of the filled samples is obtained by electron beam irradiation modification, as compared to that of using the conventional curing system.en_US
dc.description.natureFinalen_US
dc.identifier.epage387
dc.identifier.issue5
dc.identifier.scopus2-s2.0-0242493570
dc.identifier.spage381
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-0242493570&partnerID=40&md5=05289708eef9a0570ece5ab48b8abd43
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/29918
dc.identifier.volume12
dc.pagecount6
dc.sourceScopus
dc.sourcetitleIranian Polymer Journal (English Edition)
dc.subjectBlends
dc.subjectCarbon black
dc.subjectCross-linking
dc.subjectElectron beam
dc.subjectFiller
dc.subjectRadiation
dc.subjectBlending
dc.subjectCarbon black
dc.subjectCuring
dc.subjectDosimetry
dc.subjectElectron beams
dc.subjectFillers
dc.subjectIrradiation
dc.subjectPolymer blends
dc.subjectTensile strength
dc.subjectPlastic composition
dc.subjectSwelling index analysis
dc.subjectLinear low density polyethylenes
dc.titleElectron Beam Cross-Linking of Carbon Black Filled NR/LLDPE Blendsen_US
dc.typeArticleen_US
dspace.entity.typePublication
Files
Collections
SCOPUS