Publication:
Design of an RF-DC conversion circuit for energy harvesting

Simple item page
dc.citedby17
dc.contributor.authorDevi K.K.A.en_US
dc.contributor.authorNorashidah Md.D.en_US
dc.contributor.authorChakrabarty C.K.en_US
dc.contributor.authorSadasivam S.en_US
dc.contributor.authorid44061220300en_US
dc.contributor.authorid9335429400en_US
dc.contributor.authorid6701755282en_US
dc.contributor.authorid35759552500en_US
dc.date.accessioned2023-12-29T07:45:41Z
dc.date.available2023-12-29T07:45:41Z
dc.date.issued2012
dc.description.abstractThe design of voltage multiplier module used for energy harvesting system from ambient at downlink radio frequency range (935.2 MHz-959.8 MHz) of GSM-900 is presented. The function of this voltage multiplier circuit is to convert the RF energy signal into DC voltage that can be used to energize the low power electronic devices. The design was based on the Villard voltage multiplier circuit. A 4-stage Schottky diode voltage multiplier circuit was designed, modeled, simulated, fabricated and tested for its performance. Multisim was used for the modeling and simulation work. Simulation and practical tests were carried out for various input power levels at the specified frequency band. The RF input power levels verses the output voltages at the nodes of the Villard network were recorded. The input for the voltage multiplier module was fed through an efficient matching network from an RF energy harvesting antenna which is designed at 377 ? impedance. For a received signal of -27dBm (1.99) ?W at the antenna modules produce a DC output voltage of 2.1 V across 100 k? load. � 2012 IEEE.en_US
dc.description.natureFinalen_US
dc.identifier.ArtNo6507787
dc.identifier.doi10.1109/ICEDSA.2012.6507787
dc.identifier.epage161
dc.identifier.scopus2-s2.0-84877817550
dc.identifier.spage156
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84877817550&doi=10.1109%2fICEDSA.2012.6507787&partnerID=40&md5=a17d896e9a71722013fc38eb8802aa4a
dc.identifier.urihttps://irepository.uniten.edu.my/handle/123456789/30226
dc.pagecount5
dc.sourceScopus
dc.sourcetitleInternational Conference on Electronic Devices, Systems, and Applications
dc.subjectAntenna feeders
dc.subjectAntennas
dc.subjectComputer simulation
dc.subjectDesign
dc.subjectElectric power systems
dc.subjectEnergy harvesting
dc.subjectFrequency bands
dc.subjectGlobal system for mobile communications
dc.subjectSchottky barrier diodes
dc.subjectEnergy harvesting systems
dc.subjectMatching networks
dc.subjectModeling and simulation
dc.subjectRadio frequency range
dc.subjectReceived signals
dc.subjectRF energy harvesting
dc.subjectRF-DC conversion
dc.subjectVoltage multipliers
dc.subjectLow power electronics
dc.titleDesign of an RF-DC conversion circuit for energy harvestingen_US
dc.typeConference paperen_US
dspace.entity.typePublication
Files
Collections
SCOPUS